Last post on Apr 02, 2013 at 7:43 AM
You are in the Ford Taurus/Mercury Sable
What is this discussion about?
Mercury Sable, Ford Taurus, Suspension, Sedan
#1 of 1 Sable/Taurus Ball Joint Inspection
Apr 02, 2013 (7:43 am)
2005 Sable LSP
Last two alignments shop wanted to replace lower ball joints at 38 and 40k miles. Their tests do not correspond to Ford 2005 Workshop Manual:
1. Raise car hanging wheels. Rebound position.
2. Two hands near wheel/tire on lower control arm push up and pull down.
Note relative movement between the knuckle and lower control arm.
3. No movement - Joint is ok.
4. If movement then dial indicator. DIY - .75mm, less than 1 mm is allowable. If movement is observed - replace.
Difficult when on jack stands. Suggest lever under tire and lift or block and push with moderate force. A new joint can be made to move with lever and force. Two persons, one levering and one observing would help.