Last post on Jun 19, 2012 at 5:59 AM
You are in the Mazda Protege
What is this discussion about?
Mazda Protege, Mazda Protege5, Sedan, Wagon
#1 of 3 2003 Protege A/C problem
Jun 18, 2012 (12:34 pm)
I recently painted the a/c lines in the hood as its rusted. After 3 days the a/c won't work at fan 1-3 but switch is lighted on. But when at fan No. 4, fan would work but no cool air and switch is not lit on. Please help.
#2 of 3 Re: 2003 Protege A/C problem [gerardtd]
by Kirstie@Edmunds HOST
Jun 19, 2012 (5:25 am)
This might be a good question for our Answers section - people with mechanical expertise hang out there.
Once you have posted, you can just go back there and click "my answers profile" to check for feedback.
#3 of 3 Re: 2003 Protege A/C problem solved
Jun 19, 2012 (5:59 am)
Just got the solution to it. As the problem was similar with my Chevy Venture van, I opened the blower resistor and checked continuity. I found there is no continuity in two terminals and decided to put on small thin strand of wire and solder it. And it worked. For a while I though i would buy those blower resistor which are inexpensive for those who have something to spend.