Ask the Car People.SM


A Mechanic's Life - Tales From Under the Hood

2922 messages,  Last post on May 23, 2013 at 4:16 PM

You are in the Automotive News & Views Forum.

What is this discussion about? Auto Repair, Hatchback, Truck, Sedan

     This topic is primarily for professional mechanics, current or retired, or ardent amateurs who would like to share the suprises, victories, tricks and challenges of working on the modern automobile. All Forums members are invited, of course, to ask technicians about their work, or comment on your own experiences dealing with mechanics.
 
If you have a maintenance or repair question about your vehicle, please use search to find one of our Maintenance and Repair discussions, or ask a question in Edmunds Answers.

Messages Page 173 of 293

#1714 of 2922 Re: Just to clarify... [Mr_Shiftright] by xwesx

Feb 25, 2013 (5:57 pm)

Replying to: Mr_Shiftright (Feb 25, 2013 11:18 am)
I'm not real picky about the brand, but I do make a point to buy my tools US-made. I don't know for certain whether they're better, but I'll support industry in my own country where I can.
 
Tools are one type of purchase where I expect that it should be a once-in-a-lifetime event. For me, that's turned out to be twice-in-a-lifetime, as apparently someone else needed my tools more than me about fifteen years ago. C'est la vie.

#1715 of 2922 Re: Just to clarify... [xwesx] by roadburner

Feb 25, 2013 (9:16 pm)

Replying to: xwesx (Feb 25, 2013 5:52 pm)
I wouldn't dream of using a 3/8" socket!
 
Well, I've used it since the '80s, primarily for wheel changes- and I typically applied 65-95 lb-ft of torque. I ended up buying a 1/2 inch drive 17 mm impact socket and a longer breaker bar- but my next garage purchase will be an 18V cordless impact wrench- it should save my back and be more convenient in the pits.

#1716 of 2922 Re: Just to clarify... [xwesx] by isellhondas

Feb 26, 2013 (9:50 am)

Replying to: xwesx (Feb 25, 2013 5:57 pm)
I hate hearing stories of people getting their tools ripped off.
 
In the "old days" they used to hang horse thieves because they were basically stealing a person's liveihood. No difference between that and stealing a man's tools.

#1717 of 2922 Give Us Your Feedback! by Mr_Shiftright HOST

Feb 26, 2013 (10:01 am)

Sorry to interrupt for a moment, but when you have a chance, please stop by our new "Forums Future" discussion and tell us what you like, and do not like, about our current forums, and how we might improve them when we implement new software! Mr. S thanks you, and please continue.
 
FORUMS FUTURE DISCUSSION
 

#1718 of 2922 Re: Just to clarify... [isellhondas] by xwesx

Feb 26, 2013 (1:43 pm)

Replying to: isellhondas (Feb 26, 2013 9:50 am)
Darn straight. It took me a couple weeks before I wasn't walking around livid all the time. My wife (fiancee at the time) still married me though, so I must have toned it down within a reasonable time frame.
 
Many of those tools I had purchased with summer jobs in middle and high school, though, so I had a lot of investment in them, even if the total dollars lost was "only" about $1,500 or so.

#1719 of 2922 Re: Just to clarify... [xwesx] by thecardoc3

Feb 26, 2013 (6:42 pm)

Replying to: xwesx (Feb 26, 2013 1:43 pm)
I know a few techs who have lived through the nightmare of having their tools get stolen or lost in a shop fire and it isn't a pretty picture. Its rare for a shop to insure its employees tools. There are a few that do, but they are the exception. The average senior technician will easily have over $50,000 in his tools. Some might think that the techs home owners insurance will cover the tools and in fact with a rider to do so and an accurate inventory list on file with the agent, they do, provided the tools are at the techs home.
 
Insurance companies play games too. If I suffered a complete loss, they will cover about $160,000 for my tools but only if I am replacing them. My actual loss would be over $300K retail today.
 
The most ignorant of all of the stories would be about a technician who's tools were stolen while he worked at a dealership. The dealership of course required the techs to have their own tools, and they didn't provide any insurance for the techs tools. He didn't have the money to replace his tools and subsequently lost his job over it! A bunch of us got together and each chipped in with anything that we had duplicates of and we got him reasonably set up, and even helped him find another job but nothing was really going to ever erase the hurt he experienced.
 
There was an attempted break in at my shop last fall. The alarm system scared off who-ever was trying to break in, and since I work on all of the local policeman's personal cars, they responded to the call in a big hurry. Still, its always a concern.

#1721 of 2922 A properly labeled bottle of oil by thecardoc3

Feb 28, 2013 (6:04 am)

So we are on our way back home from the work that I did in Memphis. We stopped into a truck stop and took a short break from the road. While I was waiting for my wife I took a minute to check out some of the products on the shelf. The Kendall Liquid Titanium 5W30 bottle caught my eye, so I looked to see what it said on the back.
 
API SN, ILSAC GF5. OK, that's the current standards. Then it had Chrysler MS6395 (T). Now that's excellent, they specified the exact rating that they met and it is the newest Chrysler specification. They had the Ford WSS M2930-B. Then they showed "GM 4718M (obsolete)". I put the GM spec in quotations here because they are open about the fact that the specification is no longer in effect by listing it as obsolete. However, the fact that it meets the Chrysler MS6395 "T" actually means it really does exceed that obsolete GM spec. But at the same time, it did not say dexos1 anywhere on the bottle. There was nothing on that stores shelf that had the dexos1 label on the front of the bottle. There were other products that met the API 5W30 and they weren't even all SN.
 
If a GM vehicle owner that requires dexos1 had to add oil, that Kendall was the best choice, especially since it meets the newest Chrysler spec. But they made it very clear that it isn't approved for the dexos1 specification. So this morning I checked and guess what, there is a brand new list for dexos licensed products. (Feb 20th 2013) Kendall does not have one. Now the next time you are out at the store, compare what you see on the back of their bottle, to what you find on other products.
 
http://www.gmdexos.com/licensed brands/dexos1licensedbrands.html
 
When consumers, shops, and techs understand how to choose the correct products for given cars, they will find the correct products on the store shelves.
 
BTW, there were no products suitable for any of the European vehicles on that store's shelf.

#1722 of 2922 Doc, what's your opinion? by busiris

Feb 28, 2013 (9:48 am)

Doc,
 
This short video of a runaway acceleration event was on the CNN website yesterday. Being a mechanic that has a better understanding of the interaction between the many components on modern cars, I would like to get your opinion on what you think happened.
 
Personally, I find it difficult to believe so many sub-systems could fail simultaneously....
 
The family has secured the services of an attorney...
 
http://www.cnn.com/video/standard.html#/video/us/2013/02/27/dnt-teen-out-of-cont- - rol-car.wfaa

#1723 of 2922 Re: A properly labeled bottle of oil [thecardoc3] by isellhondas

Feb 28, 2013 (10:00 am)

Replying to: thecardoc3 (Feb 28, 2013 6:04 am)
Doc,
 
Do you REALLY think using an "incorrect" otherwaise quality oil would affect the life of a car's engine one twit over 200,000 miles?
 
Assuming it's changed on time of course.

Messages Page 173 of 293

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement