Ask the Car People.SM


Downshifting on 2011 Legacy (manual)

13 messages,  Last post on Feb 28, 2012 at 9:56 AM

You are in the Subaru Legacy & Outback Forum.

What is this discussion about? Subaru Legacy, Subaru Outback, Brakes, Transmission, Sedan, Wagon

Messages Page 2 of 2

#11 of 13 Re: Downshifting on 2011 Legacy (manual) [gm66montreal] by xwesx

Jan 26, 2012 (3:30 pm)

Replying to: gm66montreal (Jan 26, 2012 3:08 pm)
Is the shifter difficult to move, or just not want to slip into gear? If it was not winterized at the dealership, it may have 80w-90 in the transmission. Switching to a 75w-90 synthetic would help significantly in that temperature range. And, if the car is sluggish to move at that temperature, I would also swap out the differential oil while you're at it.

#12 of 13 2010 Legacy Spark Plug Change 2.5l by tsizzle

Feb 27, 2012 (6:03 pm)

I have about 55k on a 4 cyl model, no turbo. The spark plugs look very accessible and I am going to change them. Just wanted to checkin to see if there may be an issue before getting into it. I am definetely not a mechanic - just an oil changer! I've had no problems with this car by the way - definately a good car for me.

#13 of 13 Re: 2010 Legacy Spark Plug Change 2.5l [tsizzle] by xwesx

Feb 28, 2012 (9:56 am)

Replying to: tsizzle (Feb 27, 2012 6:03 pm)
There shouldn't be any problems. They do sit deep into the heads, so you'll likely need one or more extensions on your socket, but I have found it to not be too difficult, even on previous generations, which were much tighter than current. I found that with my cars, I needed to remove the air box on one side and the battery on the other, and use a universal joint directly out of the socket (between it and the extension) in order to clear the frame for the #3 and #4 cylinders.

Messages Page 2 of 2

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement