Last post on Dec 15, 2011 at 9:28 AM
You are in the Pontiac G6
What is this discussion about?
Pontiac G6, Sedan
#1 of 10 Door Locks
Dec 09, 2011 (9:31 pm)
Does anyone know what is the cause when the door locks won't work when you shift from park?
#2 of 10 Re: Door Locks [chmeeks]
Dec 10, 2011 (9:09 am)
Not programed in the DIC.
#3 of 10 Re: Door Locks [gonogo]
Dec 10, 2011 (8:33 pm)
Does anyone know if it can be programmed without going to the dealer?
#5 of 10 Re: Door Locks [gonogo]
Dec 11, 2011 (2:44 pm)
Thanks for the input, but the manual says that it was programmed at the factory. There is no where in it on saying how to program it. Any suggestions?
#6 of 10 Re: Door Locks [chmeeks]
Dec 12, 2011 (10:26 am)
Sounds like you don't have a DIC, was this a rental? If you have DIC there will be some buttons on the left side of the radio, info, menu, arrow or enter, if not dealer program.
#7 of 10 Re: Door Locks [gonogo]
Dec 12, 2011 (3:10 pm)
I do have a DIC. This was not a rental. I have checked all the buttons as you said, but no way of programming. I have a 2006 base model.
#8 of 10 Re: Door Locks [chmeeks]
Dec 13, 2011 (9:11 am)
Menu is the button you push to program, do you have menu?
#9 of 10 Re: Door Locks [gonogo]
Dec 13, 2011 (2:31 pm)
Yes, I do! I push the meunu button. Do I press and hold at some point? Exactly, what do I do?
#10 of 10 Re: Door Locks [chmeeks]
Dec 15, 2011 (9:28 am)
Press menu button until you see the what you want to change. Then press arrow or enter to make selection, then press menu to record your selection.