Clunking from front end

8 messages,  Last post on Dec 23, 2011 at 9:08 AM

You are in the Lincoln LS Forum.

What is this discussion about? Lincoln LS, Sedan

#4 of 8 Re: Clunking from front end [jpal2626] by larryk0202

Feb 10, 2011 (6:55 am)

Replying to: jpal2626 (Feb 07, 2011 9:48 am)
I've had that before, my problem was the "sway" bar. Pretty inexpensive, or could be the tie rods.

#5 of 8 2004 Lincoln LS Sway Bar Bushings by sailorlen10

Dec 06, 2011 (3:42 pm)

Does any one know what size sway bar bushings this car takes? Front and rear the same size? Thanks!!

#6 of 8 2004 Lincoln Sway Bar Bushings by sailorlen10

Dec 06, 2011 (3:43 pm)

Does any one know what size sway bar bushings my car takes?? Thanks!!

#7 of 8 Re: 2004 Lincoln Sway Bar Bushings [sailorlen10] by karg

Dec 22, 2011 (10:46 am)

Replying to: sailorlen10 (Dec 06, 2011 3:43 pm)
The sway bar bushings - I don't believe are available by themselves for the 2004 or earlier - according to the other previous posts.
 
I replaced my entire sway bar and it was indeed a job to do - fishing that darn thing through the front end and past all of the parts. I ended up have to unbolt the suspension from one side to get it to pass semi-easily.
 
Anyway- I know that the "Sport model" had a different sway bar for the 2000 model - not sure of 2004. My guess is that you'd have to know that, as well.
 
Bottom line - I don't believe they sell just the bushings.

#8 of 8 Re: 2004 Lincoln Sway Bar Bushings [karg] by toomanyfumes

Dec 23, 2011 (9:08 am)

Replying to: karg (Dec 22, 2011 10:46 am)
Yeah I've heard you have to replace the whole sway bar. I don't think the sway bar is much of an issue on the 2nd gen (2003-up) LS's, I'd make sure that was the problem before replacing it.
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement