Last post on Jun 25, 2012 at 11:06 AM
You are in the Mazda CX-9
What is this discussion about?
Mazda CX-9, Mazda CX-7, Mazda MAZDA6, Security System, Safety Technology, Interior, SUV
#5 of 14 Re: Automatic door locking [davicho]
Sep 09, 2010 (1:57 pm)
No problem---This applies to 2010 Mazda3 Mazda6 CX-7 CX-9. 2010 Mazda6 vehicles with BCM GS3L-67-560 and BCM GS3M-67-560 are not equipped with this feature.
Below are the main instructions:
1: Stop the vehicle and close all the doors
2: Switch the ignition to ON
3: Press and hold the lock side of the driver's side door-lock switch within 10 seconds of switching the ignition ON, a "beep" will be heard about 8 seconds afterwards.
4: Referring to the table, determine the function number for the desired setting and press the unlock side of the door-lock switch in the amount of the selected function number.
Function 1: The auto door-lock is disabled
Function 2: All doors and the liftgate lock automatically when the vehicle speed reaches about 12mph or more
Function 3: All doors and liftgate lock automatically when the vehicle speed reaches about 12mph or more. All the doors and the liftgate will unlock when the ignition is switched from ON to ACC or OFF
Function4: (A/T) only: When the ignition is switched ON and the shift lever is shifted from PARK to any other gear position, all doors and the liftgate lock automatically
Function 5: (A/T) only: When the ignition is switched ON and the shift lever is shifted from PARK to any other gear position, all doors and the liftgate lock automatically. When the shift lever is shifted to PARK while the ignition is ON all doors and the liftgate unlock automatically.
**I think A/T means automatic transmission, but I am not sure. Good luck, I hope this works for you.
#6 of 14 Re: Automatic door locking [ceric]
Sep 09, 2010 (1:59 pm)
Hi I just posted the how-to on the thread. Try it, maybe it works for you.
#7 of 14 Re: Automatic door locking [jorojoro]
Sep 11, 2010 (1:12 am)
No. Tried it.
Does not work for 2008 GT AWD.
My BCM model is
TD12 67 560D.
#8 of 14 Re: Automatic door locking [ceric]
Sep 11, 2010 (5:53 pm)
This is great stuff for 2010 owners.
Someone out there must have the instructions for us 2008 owners. Give it up....
#9 of 14 Re: Automatic door locking [knowaczark]
Sep 12, 2010 (8:01 pm)
Don't think so.
I browsed through my 2008 WorkShop manual many times.
There is no mentioning of anything like that.
Also, 2009 owners have tried this procedure w/o success.
So far, it only works for 2010 owners.
#10 of 14 Re: Automatic door locking [jorojoro]
Sep 13, 2010 (9:43 am)
Thanks Joro. I will try # 4 as I would not want the car to unlock automatically when I put it into PARK
#11 of 14 Re: Automatic door locking [buyer101]
Oct 15, 2010 (3:02 pm)
Notes to 2007/8/9 owners:
Please don't try this procedure.
Not only that it does not work for yours, but someones (not everyone, though) have reported problems after trying it. Proceed at your own risks if you don't believe me. I am just passing on the warnings.
#12 of 14 Re: Automatic door locking [jorojoro]
Nov 07, 2010 (2:19 pm)
can u do this to my 2008 CX7 GT-AWD?
#13 of 14 Re: Automatic door locking [jorojoro]
Jul 24, 2011 (2:32 pm)
Thanks so much! This worked for my 2011 CX-9. Function 5 is what I have wanted since my son got locked in the car one time. My Mazda dealer here is awful to deal with, so this is what I have been looking for. Huge help!
#14 of 14 Key Control - not working
Jun 25, 2012 (11:06 am)
The battery operated key control will not lock my doors or unlock the trunk when the correct tabs are depressed on the key. The dealer changed the battery. It worked for about 2-weeks then stopped. I changed the battery in the key control again. This time it will unlock the doors, but will not lock them. It still won't open the trunk. Any ideas on how to get this fixed so the key operates the way it is suppose to?