6 messages,
Last post on May 02, 2011 at 8:44 AM
You are in the
Chevrolet Impala - Archived Discussions Forum.
What is this discussion about?
Chevrolet Impala, Chevrolet, Sedan
#2 of 6 2008 Impala Rotor (Disk) Removal
by 4steri
Jun 26, 2010 (5:56 am)
It's not an allen or star. It's a torx and the size is T-30.
Frank.
#3 of 6 Re: 2008 Impala Rotor (Disk) Removal [4steri]
by 1camaross
Jun 26, 2010 (8:28 am)
i am trying to remove this torx T-30 also and it is not budging, i dont want to strip it, any sugestions? its not left handed is it?
#4 of 6 2008 Impala Rotor (Disk) Removal
by 4steri
Jun 29, 2010 (1:36 pm)
It's best to use a T-30 that goes on a ratchet, you'll get more leverage. Also wd-40 like hell. I know the feeling, it almost feels like 3 strikes and your out. Be patient and use lots of penetrating fluid.
Good Luck.
Frank.
#5 of 6 Re: 2008 Impala Rotor (Disk) Removal [4steri]
by 1camaross
Jun 29, 2010 (6:42 pm)
Thanks, i did finally get it out after penetrating oil, waiting a bit and the ratchet method.
#6 of 6 Re: 2008 Impala Rotor (Disk) Removal [1camaross]
by gwells81
May 02, 2011 (8:44 am)
Is that torque screw the only thing needed to remove the rotor after the caliper is off? I removed that screw and rotor still felt solidly attached.