2008 Impala Rotor (Disk) Removal - READ ONLY

6 messages,  Last post on May 02, 2011 at 8:44 AM

You are in the Chevrolet Impala - Archived Discussions Forum.

What is this discussion about? Chevrolet Impala, Chevrolet, Sedan

  • All Messages Displayed

#1 of 6 2008 Impala Rotor (Disk) Removal by kwhit60

Jun 22, 2010 (7:13 pm)

Hello Everyone,
I am changing my brakes and rotors on 2008 Impala LT. Can someone tell me what tool I need to actually remove the rotor off the hub? Is it the star shaped bolt (allen)on the disc? If yes what size would that be?

#2 of 6 2008 Impala Rotor (Disk) Removal by 4steri

Jun 26, 2010 (5:56 am)

It's not an allen or star. It's a torx and the size is T-30.
 
Frank.

#3 of 6 Re: 2008 Impala Rotor (Disk) Removal [4steri] by 1camaross

Jun 26, 2010 (8:28 am)

Replying to: 4steri (Jun 26, 2010 5:56 am)
i am trying to remove this torx T-30 also and it is not budging, i dont want to strip it, any sugestions? its not left handed is it?

#4 of 6 2008 Impala Rotor (Disk) Removal by 4steri

Jun 29, 2010 (1:36 pm)

It's best to use a T-30 that goes on a ratchet, you'll get more leverage. Also wd-40 like hell. I know the feeling, it almost feels like 3 strikes and your out. Be patient and use lots of penetrating fluid.
 
Good Luck.
 
Frank.

#5 of 6 Re: 2008 Impala Rotor (Disk) Removal [4steri] by 1camaross

Jun 29, 2010 (6:42 pm)

Replying to: 4steri (Jun 29, 2010 1:36 pm)
Thanks, i did finally get it out after penetrating oil, waiting a bit and the ratchet method.

#6 of 6 Re: 2008 Impala Rotor (Disk) Removal [1camaross] by gwells81

May 02, 2011 (8:44 am)

Replying to: 1camaross (Jun 29, 2010 6:42 pm)
Is that torque screw the only thing needed to remove the rotor after the caliper is off? I removed that screw and rotor still felt solidly attached.
  • All Messages Displayed

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement