Last post on May 14, 2011 at 6:47 PM
You are in the Toyota Sequoia
What is this discussion about?
Toyota Sequoia, Toyota, SUV
#1 of 17 cruise control problems on 2010 Sequoia Platinum
Jun 15, 2010 (4:56 pm)
I have a 2010 Sequoia Platinum with 2 problems that I was wondering if anybody else has had.
#1 The cruise control will not stay on if the windshield wipers are on. After about 6 swipes across the windshield with the wipers, the cruise turns off.
#2 the tail pipe has melted the bumper after just 5000 miles. They should have extended the tail pipe past the bumper to help the heat escape but they didn't.
After buying a car valued at $61300.00 I think this is BS
Other than the items listed above I do love the car, but it is thirsty and it has a small gas tank.
#2 of 17 Re: cruise control problems on 2010 Sequoia Platinum [treedriver]
Jun 17, 2010 (4:56 am)
You technically are not supposed to use cruise control when it is raining so it shuts it down. I think this is only on the Plat. due to the Radar Cruise control. As far as the tailpipe, I would take the truck to the dealer and have them fix it. Seems that should be covered under warranty. Good Luck.
#4 of 17 2011 Radar Cruise Control
Nov 28, 2010 (8:48 pm)
Option completely failed and stopped working all together on return trip today. Anyone else encountered problems with this feature? Weather was clear. Great feature but wish it didn't break in first 3k. Any thought?
#5 of 17 Re: 2011 Radar Cruise Control [mudddh]
Dec 18, 2010 (6:07 pm)
I have a 2011 Platinum and my DLCC just stopped working on the way back from a trip as well. A light comes up on the dash saying check cruise system and the criuse in green will flash. The manual says to turn the cruise on and off and it will be fine but it does not work while driving. I turned the key off and back on and the the cruise will say that the radar is ready and will work but then stop. It's pretty random. It will not work more than it works at this point. What did you find out about yours?
#6 of 17 Cruise Control
Dec 18, 2010 (8:00 pm)
Dealership is ordering a new part. It has been about 3 weeks and I am bummed as I am headed on a long trip with no cruise. Sounds like you have the same issue. They checked it every which way and have to replace the whole thing. Good luck!
#7 of 17 Re: 2011 Radar Cruise Control [ghengisc]
Dec 18, 2010 (8:03 pm)
Part # they are ordering is 88210-34010
#8 of 17 Re: 2011 Radar Cruise Control [mudddh]
Dec 19, 2010 (12:07 pm)
Thanks for the info. Ill take it to the dealership this next week. Unfortunately my sequoia only has 500 mi on it. Could you ever get the manual cruise to work? Could you get the cruise to work at all and was it intermitent? Mine will act like it will work and then come up with the check cruise system message when I start to drive. Hope it is similar to your situation. I even tried to reset the ecu but it didn't work. What did they try and how long did it take the dealership to decide to replace it? Thanks
#9 of 17 Re: 2011 Radar Cruise Control [ghengisc]
Dec 19, 2010 (4:26 pm)
EXact same issue as you and no...the cruise will not work at all. It gives you false hop when your in park as it reads CRUSIE READY.
#10 of 17 Re: 2011 Radar Cruise Control [mudddh]
Dec 19, 2010 (6:46 pm)
Thanks for the info. Just wanted to know that I wasnt crazy. Do you have any aftermarket add-ons? What explanation did Toyota give you?