Last post on Apr 26, 2010 at 8:25 AM
You are in the Buick Park Avenue
What is this discussion about?
Buick Park Avenue, Sedan
#3 of 4 98 Park Ave. blend door
Apr 26, 2010 (8:05 am)
I have a similar problem but the passenger side blend door is not moving. I have replaced the actuator and that was not the problem. Does anyone know what the resistance of the pass. side temp sensor should be? My ohm meter reads that it is open. I have voltage to one side and nothing coming out. Any input as to whether the problem is with the sensor, pass side temp selector, or the control module would be greatly appreciated.
#4 of 4 98 Buick Park Ave diagnostic flow charts
Apr 26, 2010 (8:25 am)
I have a obd 2 code reader and can download codes till I am blue in the face. The codes are no good with out the diagnostic flow charts. A code that says low input on the mass airflow sensor could mean that way more than one problem exits. I know these charts exist from my past work as a Ford mechanic. Does anyone know where i can get this info?