5 messages,
Last post on Mar 23, 2010 at 12:10 PM
You are in the
Subaru Forester Forum.
What is this discussion about?
Subaru Forester, Child Passenger Safety
#4 of 5 Re: Child Seat Placement in 2010 Forester [golden2smith]
by xwesx
Mar 23, 2010 (11:05 am)
If this child will be the only rear seat occupant, you can really use any position in the rear. The seats are lightly bolstered (nothing like the previous generation Outback, which had a very noticeable hump and was, essentially, designed for four passengers unless someone had a hankering for a serious wedgie). If you mount the seat base using the lap belt, you can secure it very nicely by putting your body weight (I mean 'you' as in whomever does it.... I hope it will not be you, nine-months pregnant, attempting this feat!) down on the base as you secure the belt. The weight of an adult should sufficiently compress the bolstered cushion beneath such that the base will not cant, tilt, or otherwise move.
That said, it will be somewhat more difficult to use the device in the middle position given the distance from the door access points. Is it safer? Yes, in the most severe side impact situations, but for practical purposes it is not. Additionally, it will make use of the two outboard seating positions impractical.
The outboard positions cradle a carseat very nicely. In addition, the seat backs recline (not on base model) and therefore can be adjusted to match the recline of a child seat.
Both of my children love to sit in the middle rear seat (so they can more easily see out the front) but rarely are afforded the opportunity. Since my daughter, 2.5, still uses a car seat with a five-point harness, it is strapped into the car and therefore not easily movable.
#5 of 5 Re: Child Seat Placement in 2010 Forester [xwesx]
by ateixeira
Mar 23, 2010 (12:10 pm)
Reminds me - you can put a towel or some sort of non-slip liner between the child seat and the seat.