Ask the Car People.SM


Toyota Sienna Oil Filter

10 messages,  Last post on May 10, 2010 at 2:59 PM

You are in the Toyota Sienna Forum.

What is this discussion about? Toyota Sienna, Scheduled Maintenance, Van

Messages Page 1 of 1

  • All Messages Displayed

#1 of 10 S by rock30

Mar 08, 2010 (10:24 am)

Does anyone make a spin on oil filter for an 09 Sienna? Or, will an Sienna 08 spin on oil filter work for the 09 Sienna?

#2 of 10 Re: S [rock30] by ateixeira

Mar 08, 2010 (11:08 am)

Replying to: rock30 (Mar 08, 2010 10:24 am)
Same engine, so it should be the same.
 
From 2007 to 2010 they used the 2GR engine with the same filter.
 
I believe even the 2011s use the same filter cartridge. It comes with a valve to help drain the filter enclosure and two rubber gaskets. The drain plug gasket is sold seperately IIRC.
 
Here's a good photo of the 4 parts you get in the filter kit:
 

#3 of 10 Re: S [rock30] by maxwell10

Mar 09, 2010 (6:33 pm)

Replying to: rock30 (Mar 08, 2010 10:24 am)
rock,
 
guess you will have to be just like me and decide you like canister oil filters and learn to change out the canister filter.
 
so far I have not been able to get the cansiter broken free in the used 08 model van that we bought. Dealer service manage said he would give me a free oil change and insure the canister was tighten to the correct torque spec so I could break it free in the future.
 
do not know why they changed back to canister filters but they did and so far I have not seen a spin on filter adapter kit.

#4 of 10 Re: S [maxwell10] by ateixeira

Mar 10, 2010 (10:28 am)

Replying to: maxwell10 (Mar 09, 2010 6:33 pm)
That would be one HUGE spin-on filter.

#5 of 10 Re: S [ateixeira] by penzzz

May 07, 2010 (9:52 am)

Replying to: ateixeira (Mar 08, 2010 11:08 am)
I have the replacement filter kit for my 2010 Sienna, but found getting a conventional filter wrench on the filter housing to be difficult. So I'm looking for an end cap style filter wrench. Can anyone tell me what size end cap wrench to buy? In milemters?
 
Thanks

#6 of 10 Re: S [penzzz] by ateixeira

May 08, 2010 (5:41 am)

Replying to: penzzz (May 07, 2010 9:52 am)
I'm trying to remember, but isnt it just a 3/8" drive?
 
I use a ratchet but with an extension, to spare my knuckles.
 
That's all IIRC.

#7 of 10 Re: S [ateixeira] by penzzz

May 08, 2010 (10:29 am)

Replying to: ateixeira (May 08, 2010 5:41 am)
I'm sorry for not being more clear with my question IIRC. While I was researching this I saw references to a 65/67 mm diameter,14 sided end cap used on another Toyota model to remove the filter housing. So my question was about the diameter of the cup needed for a Sienna. I continued to research and then called Toyota who sells their tool. As it turns out it's a 64 mm diameter cup, so I bought one. $25 - ouch! Hope it fits my son's Camry.
 
Thanks for replying IIRC.
 
PENZZZ

#8 of 10 Re: S [penzzz] by maxwell10

May 09, 2010 (9:11 am)

Replying to: penzzz (May 08, 2010 10:29 am)
i bought the 65/67mm plastic cap oil filter socket, all it did was slip.
 
later bought a metal oil filter socket.
dealer said he would give me one free oil change so i will ask that they not tighten the oil filter so tight and maybe wiith the new metal socket I can get the oil filter off the next time I change oil in the van.
 
dealership must have buba's big brother hired to tighten up the oil filters for them when they do a oil change.
 
guess if they have a $25 toy issued oil filter socket they do not care how tight the filter is as they can get it off.
 
still like the spin on filters but must get over it.

#9 of 10 Re: S [penzzz] by ateixeira

May 10, 2010 (8:42 am)

Replying to: penzzz (May 08, 2010 10:29 am)
The V6 Camry has the same engine, so it should fit.
 
I had issues with the multi-size cups slipping, too.

#10 of 10 Re: S [ateixeira] by penzzz

May 10, 2010 (2:59 pm)

Replying to: ateixeira (May 10, 2010 8:42 am)
Plot continues to thicken. I was just outside checking the fit on the filter housing, and it's perfect. Problem is that I don't have a socket to fit the filter cup. Looks like I can get an angle on it with an adjustable wrench though.

Messages Page 1 of 1

  • All Messages Displayed
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement