10 messages,
Last post on Nov 06, 2011 at 7:45 AM
You are in the
Lexus RX 300/330/350 Forum.
What is this discussion about?
Lexus RX 300, Lexus RX 330, Lexus RX 350, SUV
#5 of 10 RX 330 Headlight removal
by joe273
Feb 19, 2010 (9:05 pm)
On a 2004, do you need to remove the bumper in order to remove the headlight?
#6 of 10 Front bumper removal
by joe273
Feb 28, 2010 (10:10 pm)
Does anyone know if you must remove the front bumper, in order to remove the headlight assembly?
#7 of 10 Re: Front bumper removal [joe273]
by wwest
Mar 01, 2010 (11:20 am)
Not on the RX300.
#8 of 10 Re: Front bumper removal [wwest]
by ineedajob
Mar 21, 2010 (10:47 am)
You have to remove the front bumper side support on the RX330. There are 3 bolts and 1 clip type support on the bumper that hold on the headlight. By the way, there is a TSB on this. If you car is under 50K miles, you most likely can get Lexus to replace the lights. This is typically a $3,000 job as they replace the headlights, ballest, and the ECU!
#10 of 10 Headlight removal
by rbunch001
Nov 06, 2011 (7:45 am)
So on an RX330, 05 i have to remove the bumper just to take my headlights off. Once i do can i take them apart and clean the lense that is completely fogged up on the inside ? Also why would lexus replace the headlights, ballest, and ECU for a lense fogging problem ? Is there a breakdown showing how to remove them ? What is a TSB ?