Last post on Aug 07, 2010 at 6:34 PM
You are in the Chevrolet Silverado & GMC Sierra
What is this discussion about?
Chevrolet Silverado 1500, GMC Sierra 1500, Chevrolet Silverado 2500, Truck
#4 of 9 Re: 2005 Silverado Z71 crew cab drive line clunk [joesmith5]
Feb 09, 2010 (5:15 am)
The "clunk" is the front driveshaft yoke snagging on the output shaft. Change front yoke to a "nickel Plated" one that is available at the dealer. The clunk will go away.
#5 of 9 Re: 2005 Silverado Z71 crew cab drive line clunk [fgjw]
Feb 09, 2010 (2:32 pm)
any idea on price on that piece? you say front yoke. to be specific its the font yoke on the rear driveshaft. not the front driveshaft for the 4x4. so to replace that front yoke i need to remove the driveshaft and then remove the ujoint. thus replacing the yoke. if this is what is wrong would i see a shinny spot somewhere on the old one where it is clunking?
#6 of 9 Re: 2005 Silverado Z71 crew cab drive line clunk [joesmith5]
Feb 10, 2010 (5:49 am)
The Yoke here in Canada is about $550. at the dealer-- only place I found one available. The "klunk" is caused by the internal splines binding on the output shaft splines. YES it is the rear drive shaft and to replace it -- it is done how You discribe. I did not see any shinny sports on Mine but it is possible. The nickel plated one has more "slip" to it. It cured Mine perfectly.
#7 of 9 Re: 2005 Silverado Z71 crew cab drive line clunk [fgjw]
Feb 11, 2010 (3:45 pm)
wow 500 bucks for this part. i dont think i will be replacing it unless it will cause damage if left alone. this is definalty something that chevy should have taken care of while under warranty. instead of saying "that is normal". everytime i brought it to them while under warranty they always said the same thing if money was comming out of there pocket.
now for the past 10k miles my abs has been comming on at low and dry speeds. i just diconnected one wheel sensor. this made the light come on the dash. so i took the dash out and put black electrical tape over the light under the dash overlay. this way you dont see the light and you dont see the tape.
#8 of 9 2007 GMC classic crew Z71 5.3 ' CLUNK '
Jul 17, 2010 (6:45 pm)
Seems to be in rear end during shift from 1-2 and at downshift sometimes. Is this the yoke spline problems or is this very sloppy tolerances in rear end?? Is there really a fix for this? Have 44k on the truck.
#9 of 9 2006 Z71 Crew cab drivetrain clunk
Aug 07, 2010 (6:34 pm)
I just recently bought my silverado and have also noticed a clunk only from a dead stop under light or heavy acceleration. It doesn't do it all the time, it does sound like it comes from the rear end.
Is there anyway to check the yoke at home or should i just bring it in for a mechanic to check things over? This clunk bothers me when it happens.