Ask the Car People.SM


Enable DRL after replacing bulb.....

2 messages,  Last post on Dec 21, 2009 at 6:26 PM

You are in the Subaru Forester Maintenance & Repair Forum.

What is this discussion about? Subaru Forester, Lighting

Messages Page 1 of 1

  • All Messages Displayed

#1 of 2 Enable DRL after replacing bulb..... by pixieflyby

Dec 18, 2009 (10:20 am)

I recently replaced a low beam bulb in forester 2007. Had to unhook and remove battery to gain access. After replacing bulb, and hooking everything back up, my DRL's quit working. Does anyone know why they quit working and how to enable them again........

#2 of 2 Re: Enable DRL after replacing bulb..... [pixieflyby] by aatherton

Dec 21, 2009 (6:26 pm)

Replying to: pixieflyby (Dec 18, 2009 10:20 am)
The DRLs are controlled by a resister (white box) behind a black bracket with a heat warning, mounted on the passenger strut tower. There is a harness going to the resister with a large black plug in it. Maybe the two halves of the plug came loose from each other. I unplugged mine completely:
http://s49.photobucket.com/albums/f280/vintagefortytwo/Forester/?action=view&cur- rent=DRL-plug-2008.jpg

Messages Page 1 of 1

  • All Messages Displayed
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement