Last post on Dec 05, 2011 at 12:39 PM
You are in the Mitsubishi Lancer
What is this discussion about?
Mitsubishi Lancer, Sedan
#1 of 5 02 Lancer - replacing the slave cylinder
Nov 07, 2009 (9:03 am)
Can anyone point me to some "How to" info on changing the slave cylinder. Or has anyone ever change one?
I thought it was the clutch master, changed it and it worked for a week and then, no clutch again. I'm assuming it's the slave cylinder. I hope I don't have to drop the transmission.
Thanks in advance for the help.
#2 of 5 slave cylinder
Nov 07, 2009 (9:28 am)
I forgot to mention that my sister drove the car today and it was fine. Is that normal symptoms
#3 of 5 Beeding the clutch
Nov 07, 2009 (3:20 pm)
Is there a specific way to bleed the clutch, or is it just like bleeding the breaks? Press - open valve - close valve - release, etc.
Mar 04, 2011 (9:41 am)
If you are going to bleed the clutch, what you have posted is correct. If you are going to replace the slave cylinder then you would have to drop the transmission since it is inside the transmission.
Hope that helps
Dec 05, 2011 (12:39 pm)
Hey everyone, can someone out there tell me if you can swap in a 2.4 liter in place of the 2.0 in a 2002 Lancer and not have to change anything?
Will the computer learn the bigger engine?
Is there really anything different except the displacement?