Radio/Nav/AC Control Bezel Removal (2007)

2 messages, Last post on Oct 29, 2009 at 11:01 AM

You are in the Chevrolet Suburban & Tahoe Forum. Your Hosts are steve_ & tidester

#1 of 2 Radio/Nav/AC Control Bezel Removal (2007) by gregpet Oct 28, 2009 (6:53 pm)
I have a 2007 Tahoe with about 40k miles (just out of warranty!) and would like to remove the bezel (plastic woodgrain piece) that surrounds the radio/nav & AC controls. A barely noticable but very annoying crackle has started and it sounds like it's coming from behind the bezel. I'm thinking maybe a screw has become a little lose which is causing the noise. I would like to get in behind and just tighten everything down... Has anyone had any experience removing this piece? Are there any removal instructions out on the web? It's a pretty tight fit so I don't want to just start prying on it and see if it pops off. Maybe there is a special tool?? Any help would be appreciated... Thanks, Greg Replies to this message: rschuck (Oct 29, 2009 11:01 am)
#2 of 2 Re: Radio/Nav/AC Control Bezel Removal (2007) [gregpet] by rschuck Oct 29, 2009 (11:01 am)
Replying to: gregpet (Oct 28, 2009 6:53 pm) It is very easy. The bezel just pops off held by three clips. The following link has a video showing how it is done. www.coastaletech.com/GMLOCKPICK.htm I installed the lockpick and I love it.