Hyundai Santa Fe Cargo Screen installation problems

2 messages, Last post on Oct 10, 2009 at 8:16 PM

You are in the Hyundai Santa Fe Forum. Your Hosts are steve_ & tidester

What is this discussion about? Hyundai Santa Fe, SUV

#1 of 2 2009 Hyundai Santa Fe Cargo Screen installation problems by big_rich Oct 10, 2009 (5:26 pm)
I just purchased a genuine Hyundai Cargo Screen kit for my 2009 Santa Fe and there were not directions in the kit or any tools to remove the plastic caps along the side boards where it needs to be installed. Can anyone help me and let me know if I am missing any pieces from the kit and/or how to remove the caps without scratching up the side board? I appreciate any help you can provide. Replies to this message: denvertrakker (Oct 10, 2009 8:16 pm)
#2 of 2 Re: 2009 Hyundai Santa Fe Cargo Screen installation problems [big_rich] by denvertrakker Oct 10, 2009 (8:16 pm)
Replying to: big_rich (Oct 10, 2009 5:26 pm) All you need is a small thin-blade screwdriver to get in between the plugs and the molding. It took me a bit of effort, and I did scratch up the molding a bit (it's hidden by the arm of the screen once it's in place). Go slowly and carefully, they'll pop out.