You have saved this page | See all saved pages
Mitsubishi Endeavor Maintenance and Repair
575 messages, Last post on Mar 30, 2013 at 7:33 AM
You are in the Mitsubishi Endeavor Forum.What is this discussion about? Mitsubishi Endeavor, SUV
#566 of 575 Re: Front Transaxle Whine [endeav04awd] by mouricecheeks
Sep 29, 2012 (9:48 am)
Replying to: endeav04awd (May 20, 2011 8:37 am)
Just fixed a 03 Endeavor that had this problem. The exhaust flange behind bank 2 converter had broke where the final converter and rest of the exhaust system connects to. I was able to remove the bolts and place the flange back in place and weld it. sounds much better now.
#567 of 575 Re: Endeavor won't start [jen80] by cinchap
Nov 21, 2012 (7:48 am)
Replying to: jen80 (Dec 20, 2006 9:50 am)
We just started having the same issue...any answers to help us?
- paul189 (Nov 26, 2012 7:03 pm)
Replies to this message:
#569 of 575 Re: Car frozen and not starting [Abaha] by cinchap
Nov 26, 2012 (3:02 pm)
Replying to: Abaha (Dec 27, 2008 12:19 pm)
We are having the same issue. No answers after 4 weeks!
#570 of 575 Re: Endeavor won't start [cinchap] by paul189
Nov 26, 2012 (7:03 pm)
Replying to: cinchap (Nov 21, 2012 7:48 am)
would you mind elaborating on the issue? I dont see what your are referring to as the issue. sorry.
#571 of 575 Re: Endeavor won't start [jen80] by paul189
Nov 26, 2012 (7:10 pm)
Replying to: jen80 (Dec 20, 2006 9:50 am)
seems like I had a similar experience a while back and the issue was resolved by replacing the mass air flow sensor. of note, i have a car md and use it to get the error codes when the check engine light is lit. doing this helps to narrow the search and eliminate some of the needless searches and/or repairs. BTW, i got my mass airflow sensor from a local junkyard for $50 as compared to $250 and a multi-day wait.
#573 of 575 Re: TCL Light, Check Engine Light and rough idle [2014] by lgonza1454
Feb 05, 2013 (2:04 pm)
Replying to: 2014 (Mar 31, 2010 3:15 pm)
I may be the ignition coil, change the ignition coil on 36 and it should smooth out. I had the same problem with misfire in chamber #3. changed the ignition coil and it is running like new. Good look on it. Easy fix you can do it yourself. Firing ignition sequence as follows
1 3 5
2 4 6
the coils 1,3,5 are in the back of manifold you can not see those 2,4,6 are right in front from left 2, 4, 6 to right in the front on engine. #6 is on your left above the motor oil cap. change that one and all is good trust me. that should correct misfire chamber #6 also disconnect the battery and reboot cars computer so that it can acknowledge new ignition coil. if not it will continue to misfire.
#574 of 575 heat by sjameson
Feb 13, 2013 (6:13 am)
i get good heat out pass side on all setting but cold out drivers side on all setting 2004 endeavor#575 of 575 alarm by idriss69
Mar 30, 2013 (7:33 am)
my key controler of my 2005 mitsubishi endeavor xls only opens the doors and closes but my alarm does not sound at all.My horn is working fine and the light all light blinks when i push the lack or unlack button.A thief has broken in to my car already i despretly need help.I tried to reprogram but there is no change.To POST a message, please
Sign In.
Advertisement
Most Popular in Forums
Search Forums
Enter Keyword(s):
Learn More, Do More
Edmunds Community
Advertisement