Ask the Car People.SM


Blower Ploblem

6 messages,  Last post on Feb 22, 2013 at 12:42 PM

You are in the Lincoln Town Car Forum.

What is this discussion about? Lincoln Town Car, Sedan

Messages Page 1 of 1

  • All Messages Displayed

#1 of 6 Blower Ploblem (ATT RALKA) by lp284

Aug 17, 2009 (5:37 pm)

Have a 2000 town car, The blower just stoped working, Checked the fuses under the hood and the ones under the dash on drivers side, Ran hot wire to the motor and it is ok, Thanks in advance for any help. They say a guy name RALKA is in the know on these Lincoln

#2 of 6 Blower motor by lp284

Aug 19, 2009 (10:34 am)

Ok guys I got it fixed, I solded a bad connection on the module, Now I am back to go, Thanks every one for pointing me in the right direction, This is a good site, I`ll be comming here for all my help...

#3 of 6 2001 Blower air flow is weak !!! by chasss

Apr 30, 2010 (10:39 pm)

I bought my 2001 Town Car in Florida a few years back.. I drove it to Texas.. and it seemed that it did not move as much air as any one of my other cars.. (88 Chevy Wagon, 94 Roadmaster wagon, and 99 Explorer). The air was cool or warm.. just not much flow.. or speed of flow maybe is a better description. It feels like if there are two blowers that only one is working. I took it to Lincioln.. and their answer was that they have had many complaints on this model.. and it was just under designed from the factory.. I let it go at that then.. But it still just doesn't sound right to me... My other cars will blow your hair out of place.. not this Lincoln.
 
Any suggestions? Does it have two blowers.. or just one.. and a weak or low speed one at that. It changes speeds at request.. but just not enough air moves..

#4 of 6 Re: Blower motor [lp284] by bdudley

Aug 09, 2010 (12:13 pm)

Replying to: lp284 (Aug 19, 2009 10:34 am)
Having same prob.Where is module that you are talking about

#6 of 6 Re: Blower Ploblem (ATT RALKA) [lp284] by jackienj

Feb 22, 2013 (12:42 pm)

Replying to: lp284 (Aug 17, 2009 5:37 pm)
The connectors to the blower motor resistor ( module ) burn and melt ... we found out at our shop the connector melted, then burned out the resistor.
 
The dealer and aftermarket sells a kits with the resistor and connector togther.
 
From what I am reading online, looks like a common problem !

Messages Page 1 of 1

  • All Messages Displayed
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement