ABS Brake Line Configuration

2 messages, Last post on Aug 06, 2009 at 12:31 PM

You are in the Buick Regal Forum. Your Hosts are pat & karens

What is this discussion about? Buick Regal, Brakes, Sedan

#1 of 2 ABS Brake Line Configuration by miked_1966 Aug 05, 2009 (8:26 pm)
Hi all...My 96 just sprung a leak on the brake line for the RF wheel. The car is equipped with the ABS module muonted on the side of the master cylinder. I know the 2 lines at the back of the unit go to the rear wheels (these would be numbered 3 and 4) can anyone tell me which of the lines is for the RF wheel (line 1 or 2)? the way the lines are run is totally ridiculous, sort of have to wiggle in with both arms while trying to hold a light and look for a line you can't see. Thanks in advance for your consideration. Replies to this message: miked_1966 (Aug 06, 2009 12:31 pm)
#2 of 2 Re: ABS Brake Line Configuration [miked_1966] by miked_1966 Aug 06, 2009 (12:31 pm)
Replying to: miked_1966 (Aug 05, 2009 8:26 pm) Silly me....I should have looked a bit harder and cleaned off the dirt. the lines are marked on the ABS housing at the master cylinder.