Brake switch removal?

3 messages, Last post on Jul 04, 2009 at 7:03 PM

#1 of 3 Brake switch removal? by mram50 Jun 30, 2009 (9:48 am)
My brake lights won't turn off even when I depress the switch under the dash so I'm assuming the switch is bad or there could be another issue.. Anyway, can anyone give me a clue where to locate a diagram of how to get the switch removed? This is a jumble of wires and plastic and steel and right now I'm not sure where to begin without just ripping into things. Also the brake light on the dash is on as well because i know one of the rear cylinders has a slow leak, but that's never been a problem. (well, it IS a problem, but...)The problem now is I can't get the brake lights to shut off at all without pulling the battery and can't figure out how to remove the switch. Any suggestions? Thanks. Replies to this message: mram50 (Jun 30, 2009 10:34 am) dran1 (Jul 04, 2009 7:03 pm)
#2 of 3 Re: Brake switch removal? [mram50] by mram50 Jun 30, 2009 (10:34 am)
Replying to: mram50 (Jun 30, 2009 9:48 am) I ruled out the switch. I removed it and the lights are still on.. Any ideas from here? Replies to this message: dran1 (Jul 04, 2009 7:03 pm)
#3 of 3 Re: Brake switch removal? [mram50] by dran1 Jul 04, 2009 (7:03 pm)
Replying to: mram50 (Jun 30, 2009 10:34 am) i have never had one stay on but myself and several people i know have had the "block" under the bed where taillights plug into go bad that's probably it good luck Darren