Last post on Jan 18, 2012 at 4:37 PM
You are in the Jeep Cherokee and Jeep Grand Cherokee
What is this discussion about?
Jeep Grand Cherokee, SUV
#19 of 24 Re: Problem solved...for me at least! worth a shot, try it out.... [mikebergman]
Jun 05, 2011 (6:49 am)
hey i have the same problem..send me the pictures
#20 of 24 Re: 2005 starter clicks but will not start [teberts]
Jul 03, 2011 (1:45 pm)
Try changing the starter relay in the distribution center under the hood. I had the same problem in my 1994 Jeep Grand Cherokee and the starter relay was bad. And Dodge found out there was a wire between the distribution box and the ecm was broke. So they ran a ground wire from fuse box under the hood to the neg termenal to the battery and it solved my problem. I hope this helps sense there is such a gap in the years.
#21 of 24 My over drive will not kick on
Jul 03, 2011 (1:48 pm)
I had overdrive before Dodge changed my nuteral safty switch, now i don't have overdrive. What could be the problem? The fluid is full.
#22 of 24 Re: 2002 jeep 4.0 I6 starting problem [tuggajb]
Jul 19, 2011 (8:28 am)
I am having a problem with the click click of the starter on a 2005 Jeep Cherokee Limited. It would start sometimes after several attempts. Now no start just clicks. Funny thing, I noticed this after using a cigarette lighter charger for my phone, after connecting this problem I unplugged the charger. now some 6 months later I used a charger again and wham! I now have this starting problem??!! Any connection to a wiring problem??
#23 of 24 Re: Anything besides the starter!?!? [surferboysc]
Aug 29, 2011 (12:39 pm)
WHEN THAT HAPPENS, TURN YOU KEY PUT YOUR CAR INTO DRIVE ThEN BAcK INTO PARK AND IT SHOULD START. Mine does the same thing, for some reason the computer doesn't notice it's in park and won't start. try it and see
#24 of 24 Re: 2005 starter clicks but will not start [dixie1994]
Jan 18, 2012 (4:37 pm)
I know these posts are older but maybe I can save someone some money. I had the same "click" problem with my 2005. After having the starter checked my mechanic found it was ready to go, however, he told me that with these keys, the ignition has to read the sensor first before the engine will start, that you can't just put the key in and start it, you should wait a few seconds first. Solved the problem for me.