Is a 2" body lift required to shoehorn a 350 into S10?

Last post on May 31, 2009 at 7:07 PM

You are in the Speed Shop Tuning and Modification Forum. Your Host is steve_

What is this discussion about? GMC Sonoma, Performance Mods, Truck

Outline

Messages Page 1 of 1: All Messages Displayed

#1 of 1 Is a 2" body lift required to shoehorn a 350 into S10? by way_mobile May 31, 2009 (7:07 pm)
I have been told by a speed shop that a minimum 2 inch body lift is required to fit a small block 350 motor into my stock 97 GMC Sonoma 4X4, for some clearance isues which I forget. Since I enjoy off-roading, a modest 2 inch lift is OK with me. With 17 inch rims and BFGoodrich Mud-Terrain TA tires adding another 4 inches circumfrence, my ground clearance will be boosted by 6 inches total, for a little more off-road potential. Question: WHO SELLS A KIT to ease this MOTOR swap?

#1 of 1: Is a 2" body lift required to shoehorn a 350 into S10? by way_mobile; May 31, 2009 (7:07 pm)

I have been told by a speed shop that a minimum 2 inch body lift is required to fit a small block 350 motor into my stock 97 GMC Sonoma 4X4, for some clearance isues which I forget. Since I enjoy off-roading, a modest 2 inch lift is OK with me. With 17 inch rims and BFGoodrich Mud-Terrain TA tires adding another 4 inches circumfrence, my ground clearance will be boosted by 6 inches total, for a little more off-road potential. Question: WHO SELLS A KIT to ease this MOTOR swap?