Last post on Jul 09, 2012 at 3:26 PM
You are in the Jeep Wrangler
What is this discussion about?
Jeep Wrangler, Jeep, SUV
#48 of 54 Re: The Wobble [tired_old_dave]
Jan 08, 2012 (3:18 pm)
Sorry Mr. Marchionne. The to hell and back comment in the post, I thought, popped into my head while typing. I believe it may have been a link from Ed at inside automotive that took me to your address to your employees where you stated that phrase again and which you stated had been used in a commercial. I immediately change the channel when a mopar commercial comes on the tv.
Please read my old posts. I went to a dealer in Dallas County and a dealer in Tarrant county with the same service request. That is, please inspect the front end and do a complete alignment. Paid twice and got a report that everything was fine. I knew better from the way the vehicle was now getting very loose at times on the interstate.
Now to Discount tire for a tire check because it had to be my Duratracs. The local Discount dealer said the tires were too bad to balance as they were. I exploded. Two of your dealers gave it their blessing. The tires were originally purchased and road forced balanced by a manager who I have followed around the metroplex for twenty years. The local Discount dealer had to break the bead and rotate the tires to be able to balance them. It was obvious to them it was serious. Remember I told two dealers to inspect the front end - it was obvious something was wrong.
Went to the Discount Tire where the tires were purchased and thank goodness my friend wasn't there. I ripped the acting manager for no reason because it wasn't the Goodyear tires. I still owe them one heck of an apology.
Now if you've been reading, life has been mostly driving one interstate back and forth. Only because Rusty the local jeep service manager would sit down and talk with Sean of Screamin Lizard, I got the needed new parts. Just shy of 60K miles and the jeep feels good and the tires have smoothed themselves out. Haven't even rotated them since the new parts.
So to hell and back. I will keep mine as stock as possible and keep my paid for lifetime warranty in addition to the lifetime power train warranty that came with the jeep. And time permitting, I will ask and pay Rusty to have my favorite mechanic at his dealership, replace my Tribe 4x4 transmission cooler with your new Jeep tranny cooler so no one can say "Sorry" to me at a later date if Rusty and that mechanic someday become unavailable.
Just for the record, I have been reading about the Thai Colorado. Also reading about the new Trailblazer. Keeping the H3 and the JK as long as possible but some guys are always looking down the road.
#50 of 54 Re: The Wobble [park8]
Jan 11, 2012 (5:58 am)
If you haven't already checked it, check the upper control arm bushings on the front axle. If they're shot/dried out, replace them. They are often overlooked in Jeeps.
Now if it is a newer JK, not too sure, but I'd look there if everything else has been addressed. A tire out of balance should never cause the death wobble. It just serves as a symptom indicating SOMETHING is out of whack.
#51 of 54 Re: The Wobble
Feb 15, 2012 (3:52 pm)
I had this problem with my 04. It would shake at 45 mph, but go away if I slowed down or increased speed. I had a shop look at it and they adjusted the front end. It didn't help it changed the shake to 55 mph. A friend suggested having the tires balance. Since I was wanting to put bigger tires on it, I changed the tires, knowing that the new ones would be balanced. The shack went away. Before paying a crap load of money, have the tires balanced.
#52 of 54 Re: 2007 Jeep Wrangler DEATH WOBBLE.....good news FINALLY =) [cyndi76063]
Feb 20, 2012 (9:00 pm)
I know what you are talking about, got the dw in our 07 jeep. Been checking things out and found the bolts
in the track bar are all threads and they are .022 too small and the track bar bushing rides on the threads.
This lets the track bar shift back and forth. Can you imagine that coming out of A factory ? I am in the process
of making the correct size bolts. Will test drive tomorrow, 2/21/2012.
Something else, They keep insisting that the bolts be torqued down to 125 pounds, that is just crushing the tabs
and they hope that will keep the slack out, thats my thought.
#53 of 54 Re: Jeep wheel wobble [podedwards]
Mar 21, 2012 (1:45 am)
there is one slight error in your replym and that is on the steering dampener. Factory dampeners anr not made to handle anything but narrow "road" tires. Further if they are fo the gas charged variety, all bets are off. these are fine if you live in a moderate climate where the temps stay between 65-80 degreees F year round. if not they are only good for a handful of years, and should be replaced with oversized hydraulic units to handle the tires jeeps normally use. Also in the same vein, the factory gas charged shocks are next to worthless after three years of use, regardless of milage, due to poor design and low cost. And to expand on your wheel balance comments, Jeep for some reason has chose to use wheels that catch debris for a number of years centering around '06. The wheel has its central hub attached at the outer edge of the wheel instead of the center so it doesnt self clean and will throw itself out of balance. Especially if you play in sticky mud, or heavy snow which will freeze in the wheel, which in the north , you can not prevent, So watch out for this when you choose wheels, fancy designs do NOT make then betterm just expensivem and often they actually cause excessive tire wear when a cheap generic spoked wheel will save you bug bucks more than twice, once on the wheel, and untold times on replacement tires
#54 of 54 two possible relevant crashes found?
by Stever@Edmunds HOST
Jul 09, 2012 (3:26 pm)
"In April, the National Highway Traffic Safety Administration rejected the lawmakers' request for a formal investigation of 2005-10 Jeep Wranglers.
All manufacturer vehicles equipped with a solid axle can be susceptible to this condition and, if experienced, it is routinely corrected with a change of tires or installation of a simple steering dampener....
In fact, most reported incidents — in all manufacturer vehicles equipped with or without a solid axle — are often linked to poorly installed or maintained after-market equipment, such as lifters, oversized tires, etc. The name you've given to this condition has no basis in fact."
House Dems ask Chrysler to assist owners on 'Jeep Death Wobble' (Detroit News)