You are here: Forums SUVs Ford Escape Ford Escape driver side lean

Ford Escape driver side lean

10 messages,  Last post on Nov 20, 2009 at 5:10 AM

You are in the Ford Escape Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Escape, Suspension, SUV

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#5 of 10 Re: Ford Escape driver side lean [vg33e power] by jeffp_032056 May 05, 2009 (11:18 am)
Replying to: vg33e power (May 05, 2009 11:01 am) Yeah, except for the fact that he's got another one with the same type of lean. I've talked to him about getting a Ford rep down to look at it so I guess that if nothing is found I'll have to pursue that. Of course I'm one of those guys that seeing something like this just bugs the hell out of me. Replies to this message: vg33e power (May 05, 2009 2:16 pm)
#6 of 10 Re: Ford Escape driver side lean [jeffp_032056] by vg33e power May 05, 2009 (2:16 pm)
Replying to: jeffp_032056 (May 05, 2009 11:18 am) So the dealer has another one with the lean.....   But, perhaps your Escape and the one that is in their lot came off the same shipment and same carrier truck.   Could both vehicles have sustained the same damage due to transport???   They do harness vehicles very tight and with chains, if the guy driving the truck with the shipment of vehicles did not harness the vehicles properly from the correct areas, the damage may have been sustained then.   Just a thought!
#7 of 10 Re: Ford Escape driver side lean [jeffp_032056] by jeffp_032056 May 07, 2009 (7:06 am)
Replying to: jeffp_032056 (May 05, 2009 8:26 am) Problem fixed. Got a Ford engineer involved and found out the following:   All Escapes could have this problem. Somewhere along the assembly line they are supposed to be checked and if the problem is found they are supposed to be corrected but a lot of them are getting through for whatever reason.   The reason there is no TSB's on this is that not enough people have complained about the problem.   The fix is to insert shims in the rear between the sub-frame and the suspension. This is what Ford does to fix the problem on the assembly line.
#8 of 10 Problem not fixed by jeffp_032056 Jun 17, 2009 (3:57 am)
Update... Problem not fixed.   After working with my dealer on this problem I've found the following:   1) In my case it's not possible to shim the body both front and rear enough to solve the problem. For example, if you try placing enough shims to solve the lean on top of the front strut you'll run out of threads on the strut bolts.   2) In the rear you've basically got to double the shims for the amount of lean. For example, if you've got a 1/2" lean you've got to place 1" of shims between the rear sub-frame and body.   3) I've found that my '08 Escape is not a rare occurence of this problem. I've gone to 2 dealers and found that the first dealer had six '09 Escape's on his lot. I got out my tape measure and found that every one of them had the lean, from 1/4" to 3/4". I went to the second dealer which had three '09 Escapes, got out the tape and all of them had the lean also. I also called my son who lives in NY and had him measure his '09. He's got a lean.   WHAT THE HECK IS GOING ON?????? From what I've found I can only assume Ford is sending the Escape from the factory with this "defect". Replies to this message: randomdecoy (Nov 19, 2009 10:07 pm) jeffp_032056 (Nov 20, 2009 5:10 am)
#9 of 10 Re: Problem not fixed [jeffp_032056] by randomdecoy Nov 19, 2009 (10:07 pm)
Replying to: jeffp_032056 (Jun 17, 2009 3:57 am) Jeff, I own two Escape's; 2009 Limited 4x4 and 2010 XLT FWD hear in St Louis MO USA. Both have this exact condition. The 2009 is about 3/4" lower at the rear above the wheel on driver side, while the 2010 is about 1/2" lower at the same location. Tires are inflated same, no detectable damage found so far to either Escape.   Took 2009 to dealer, somehow their ruler reads 5/16" difference between left to right in the rear...which they say that Ford states is within mfg specs.   My ruler still reads around 3/4" difference on the 2009. Replies to this message: jeffp_032056 (Nov 20, 2009 5:10 am)
#10 of 10 Re: Problem not fixed [randomdecoy] by jeffp_032056 Nov 20, 2009 (5:10 am)
Replying to: randomdecoy (Nov 19, 2009 10:07 pm) Yes, hard to believe there's an allowance for acceptable body lean. I've seen so many with this lean that I can't understand how they are being shipped out this way and that Ford is ignoring the problem. I saw one not too long ago on a dealers lot that had to have a lean of at least 1 1/2 inch.   I've not been able to get this problem fixed/solved so the best of luck to you on it.

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Ford Escape Ford Escape driver side lean