1984 S-10 4X4 engine removal ?

2 messages, Last post on Apr 24, 2009 at 8:35 PM

You are in the GMC Jimmy Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC S-15 Jimmy, Engine, Truck

#1 of 2 1984 S-10 4X4 engine removal ? by liljimmy Apr 24, 2009 (8:07 pm)
S-15 engine swap. Maybe I asked my question in the wrong spot. I am replacing the engine in an '84 S-15 4X4 with a dump bed and I would like to have that procedure in writing, but my real question is where to break thins down. Can I separate the engine from the transmission at the bell housing and leave the transmission and transfer case in place? If so, will I be able to align the shaft into the flywheel for the install? Can I separate the trans from the transfer case and leave it in place? What to do? What to do? Please help with some good advise. Replies to this message: tidester (Apr 24, 2009 8:35 pm)
#2 of 2 Re: 1984 S-10 4X4 engine removal ? [liljimmy] by tidester HOST Apr 24, 2009 (8:35 pm)
Replying to: liljimmy (Apr 24, 2009 8:07 pm) You may want to have a look at Engine Swaps. tidester, host SUVs and Smart Shopper