You are here:
Forums
Vans & Minivans
Chrysler Town & Country/Dodge Grand Caravan
My 1996 Town and Country Van needs HELP.

11 messages, Last post on Jul 13, 2009 at 2:41 AM
You are in the Chrysler Town & Country/Dodge Grand Caravan Forum. Your Host is Karens
|
|
|---|---|
|
Replying to: ltistudent (May 21, 2009 3:21 pm) |
|
|
|
| I finally changed the Tie-rod ends inner and outer on both sides, the ball join on driver side, the sway bay link on both sides,and the shocks and both side and Thanks God the problem is gone now. I noticed that when I took the Inner Tie-rod they were real bad, so thanks guys for your suggestions and ideal. thanks!! | |
my town & country van will drive for a couple of days and then just cut off by itself..If i wait a couple of minutes it will crank right back up...what could that be?
|
|
|
Replying to: tbaby74 (Jun 28, 2009 8:13 am) Did you pull the OBD-II codes? Problem is ignition (no spark) or no fuel. First have to figure out which one of those two it is. |
|
|
Replying to: littlelady (Apr 19, 2009 2:34 pm) When I hit a "ridge" in the interstate or over some speed bumbs there is thud, it feels like the dirvers side front wheel bottoms out. Mine is a 1994 Town and Country with 188000 miles and the 3.8L V 6. So far I have changed.... The long rack (for a different issue) Sturts and shocks CV joints Had a 4 wheel alignmnet All the motor mounts (this did not fix the issue, but made a tremendous difference in the way the car behaves, I would recommend this to anyone if you are getting a jerking feeling or shaking when starting off. Sway bar bushings Any ideas would be great! Mack29 |
|
You are here:
Forums
Vans & Minivans
Chrysler Town & Country/Dodge Grand Caravan
My 1996 Town and Country Van needs HELP.
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chrysler Town and Country



Browse by Board
Browse by Topic
Today's Chats