You are here: Forums Pickups Diesels Kubota motor no start after starter failure

Kubota motor no start after starter failure

2 messages,  Last post on Apr 18, 2009 at 1:43 PM

You are in the Diesels Forum. Your Host is kcram

What is this discussion about? Diesel

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

#1 of 2 Kubota motor no start after starter failure by gasciousclay Apr 07, 2009 (11:56 am)
I replaced the starter that stayed running till it was smoking and now have a no start issue. There is a relay on the back of the injection pump that I also replaced thinking it may have been the problem.   Cranks fine and blows tons of black smoke but wont fire.   I got fuel and and have run out of ideas what it could be. Replies to this message: woodpusher (Apr 18, 2009 1:43 pm)
#2 of 2 Re: Kubota motor no start after starter failure [gasciousclay] by woodpusher Apr 18, 2009 (1:43 pm)
Replying to: gasciousclay (Apr 07, 2009 11:56 am) If the vehical is blowing black smoke then fuel is being burned. So you can verify that the fuel injectors are working there is compression and air. You can also verify proper starter cranking amps and proper starter operation. So if i understand this right the motor turns fires and cycles but wont run. OK then lets say it dosent run at all. check this: The grounds for the starter (black wire)also check for other malfuncations like lights windows most things are tied together

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

You are here: Forums Pickups Diesels Kubota motor no start after starter failure