Easy way to tell IAC vs. Manif. gaskets vs. Sensors vs. Ign.Coil/Sp.Plug?

3 messages, Last post on May 25, 2009 at 10:06 AM

You are in the Mazda Tribute Forum. Your Hosts are steve_ & tidester

What is this discussion about? Mazda Tribute, Auto Repair, Electrical, Engine, Truck, SUV

Outline

Messages Page 2 of 2: 1; 2; Prev; Next; Last

#2 of 3 Re: Easy way to tell IAC vs. Manif. gaskets vs. Sensors vs. Ign.Coil/Sp.Plug? [brijamgel] by whiskeygurl May 13, 2009 (8:09 pm)
Replying to: brijamgel (Apr 01, 2009 8:12 pm) Ok so I have had the same problems with my 01 tribute I actually changed the plugs and coils myself which was easy once you got to them not too bad of an ordeal compared to the price of labor at Mazda. But the problem in my vehicle was not the coils I did have to replace the plugs though due to them being misfired on. The problem lied in the connectors which clip into the coil. They were only $30 each compared to the $180 for the coil Replies to this message: jschukraft (May 25, 2009 10:06 am)
#3 of 3 Re: Easy way to tell IAC vs. Manif. gaskets vs. Sensors vs. Ign.Coil/Sp.Plug? [whiskeygurl] by jschukraft May 25, 2009 (10:06 am)
Replying to: whiskeygurl (May 13, 2009 8:09 pm) Whiskeygurl - thanks for the info. Having similar problems with my 01 Tribute. Have replaced the spark plugs with no improvement and am wondering if I should try those connectors that you mentioned that clip into the coil before going to the expense of replacing the coils. Can you give me some more details, please? Are the clip connectors between the coil and plug? Where did you by the parts? Do you by any chance have a part number? Thanks in advance for any help you can offer.

#2 of 3: Re: Easy way to tell IAC vs. Manif. gaskets vs. Sensors vs. Ign.Coil/Sp.Plug? [brijamgel] by whiskeygurl; May 13, 2009 (8:09 pm)

Replying to: brijamgel (Apr 01, 2009 8:12 pm)

Ok so I have had the same problems with my 01 tribute I actually changed the plugs and coils myself which was easy once you got to them not too bad of an ordeal compared to the price of labor at Mazda. But the problem in my vehicle was not the coils I did have to replace the plugs though due to them being misfired on. The problem lied in the connectors which clip into the coil. They were only $30 each compared to the $180 for the coil

jschukraft (May 25, 2009 10:06 am)

#3 of 3: Re: Easy way to tell IAC vs. Manif. gaskets vs. Sensors vs. Ign.Coil/Sp.Plug? [whiskeygurl] by jschukraft; May 25, 2009 (10:06 am)

Replying to: whiskeygurl (May 13, 2009 8:09 pm)

Whiskeygurl - thanks for the info. Having similar problems with my 01 Tribute. Have replaced the spark plugs with no improvement and am wondering if I should try those connectors that you mentioned that clip into the coil before going to the expense of replacing the coils. Can you give me some more details, please? Are the clip connectors between the coil and plug? Where did you by the parts? Do you by any chance have a part number? Thanks in advance for any help you can offer.