Sign In Join 



Villager/Quest Possessed Rear Wiper

7 messages,  Last post on Nov 17, 2009 at 1:15 PM

You are in the Nissan Quest Forum. Your Host is Karens

What is this discussion about? Nissan Quest, Mercury Villager, Auto Repair, Electrical, Van


Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#4 of 7
My 97 Mercury Villager by mercury1997
May 04, 2009 (4:19 pm)
Reply
Hello, I have a 1997 Mercury Villager 3.0L... My ? is that it shakes when i accelerate. I've replaced all 4 tires and Balanced them and rotated from front to back. Here is a list of things I've replaced: Tires, Motor and Trans mounts, both CV axles, front Struts and a front end alignment. Everything was replaced one thing at a time and it still does it and everything I replaced was with New parts. I've had it to the local shop and they can't find the problem.... Can anyone help?
 
                                           THANKS Dan
#5 of 7
97 Mercury Villager Bad Shaking!! PLEASE HELP!! by mercury1997
May 04, 2009 (4:25 pm)
Reply
Hello, I have a 1997 Mercury Villager 3.0L... My ? is that it shakes when i accelerate. I've replaced all 4 tires and Balanced them and rotated from front to back. Here is a list of things I've replaced: Tires, Motor and Trans mounts, both CV axles, front Struts and a front end alignment. Everything was replaced one thing at a time and it still does it and everything I replaced was with New parts. I've had it to the local shop and they can't find the problem.... Can anyone help?
  
                                           THANKS Dan
#6 of 7
Re: 97 Mercury Villager Bad Shaking!! PLEASE HELP!! [mercury1997] by kue
May 16, 2009 (5:57 am)
Reply

Replying to: mercury1997 (May 04, 2009 4:25 pm)

check your timing belt setting, it might be off the mark.
#7 of 7
Villager wipers not starting by juliancal
Nov 17, 2009 (1:15 pm)
Reply
I have a '93 Villager GS, with no unusual aftermarket equipment. I got it in 2001 and last year I started getting an intermittent problem with the wipers -- they don't come on when I rotate the switch into the 'intermittent' range. Sometimes, they come on if I put the switch all the way to 'High' -- other times it starts working only if I push the windshield washer switch.
 
Is this a problem with the relay, or with the switch? (I know the fuse is OK, everything else on that circuit is fine.)
 
Any suggestions on how to approach this would be fine. Just looking for ideas.
Thanks --

Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement