Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Nissan Murano Nissan Murano Start Stall and Idle Problems
19 messages, Last post on Aug 27, 2009 at 3:04 PM
You are in the Nissan Murano Forum. Your Hosts are steve_ & tidester
|
|
|---|---|
|
Replying to: ferraritech (Aug 23, 2009 6:57 pm) Note: Carb Cleaner is highly flammable. Use extreme caution and try to do this with a cool engine. (you can substitute carb cleaner with WD40- result isn't as noticeable) Get the engine to start and run on its own (if you have to have someone hold the throttle that is fine) Quick sprays of carb cleaner directly at the area between the throttle body and intake. Get the top, sides, and bottom if you can. If you have a leak there, the engine will stumble and possibly stall. Next step...go get another gasket. As far as I know, there are no aftermarket fiber gaskets for the Murano. So you will most likely have to go with Nissan's metal crush gasket. I would say this is probably fine, but if it happened once......
|
|
|
|
|
Replying to: ferraritech (Aug 23, 2009 7:08 pm) Haven't taken mine in yet, but plan to soon.
|
|
|
|
|
Replying to: turbonator (Aug 26, 2009 6:00 am)
|
|
|
|
|
Replying to: ferraritech (Aug 26, 2009 12:14 pm)
|
|
|
|
|
Replying to: turbonator (Aug 26, 2009 3:33 pm) Glad your problem was addressed and fixed. Sometimes they bat a thousand. |
|
|
take it into Nissan service centre. There has been a post regarding NISSAN's problem about this!! It's NISSAN's problem~~~~ get it fixed if under warranty. They should even do it for free as they are recalling all the ones with this problem!!
|
|
|
I am in Australia. We dont get all the range models as US. We have ST and Ti Model. Ti = top of range with reversing camera. I am buying a Ti, and they said the rear parking assist sensor WILL NOT fit due to Ti already have Reverse Camera installed. Is that TRUE? Why can't the two co-exist at the same time? Should the dealer be able to install the REAR park assist even though i have the reverse camera there??
|
|
|
|
|
Replying to: lovepub (Aug 27, 2009 5:33 am) The duct is real. |
|
|
|
|
Replying to: lovepub (Aug 27, 2009 5:36 am) Why is a parking assist sensor needed if you already can see what is behind you with the factory reverse aid? |
|
|
Well, I am not the only one driving this car. Put my wife in current Suzuki Swift, she can drift around it, put her in this SUV, i think she might knock my car's EARS off while driving into our somehow cramped up Carport. And dont mention about Parking in shopping centres,......I dont trust her. SO ===> what you mean is that reverse camera already OCCUPY the wire when I put the gear into REVERSE, that's why i can't install the Parking sensor again? The camera is installed on the tailgate door, above the car plate, while the park sensor is on the bumper. Should not have interfeering problem in terms of Location of installing. Am i right? or I am wrong? Thanks for u reply. |
|
You are here:
Forums
SUVs Nissan Murano Nissan Murano Start Stall and Idle Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Nissan Murano
Browse by Board
Browse by Topic
Today's Chats
