You are here: Forums SUVs Chevrolet Blazer Chevrolet Blazer Recalls

Chevrolet Blazer Recalls

9 messages,  Last post on Oct 29, 2009 at 10:44 PM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Blazer, SUV

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#5 of 9 Re: accelerator cable on 01 blazer [jlflemmons] by tina31 Mar 01, 2009 (7:00 pm)
Replying to: jlflemmons (Mar 01, 2009 6:52 pm) The only one hurt was me cause i just had major back surgery and just hurting real bad but DR said all pins and screws still in place. Car damage was minimal it was of course the cable but it broke the motor mounts also so it shakes but its ggod other than that. Thank you for your help. Replies to this message: jlflemmons (Mar 01, 2009 7:05 pm)
#6 of 9 Re: accelerator cable on 01 blazer [tina31] by jlflemmons Mar 01, 2009 (7:05 pm)
Replying to: tina31 (Mar 01, 2009 7:00 pm) Having just changed the motor mounts on BOTH of my Blazers, and from all I have heard from others, your accident didn't do your motor mounts any good, but if they had not been replaced in 140K miles, I would bet money they were already broken, and thats why the motor moved. These engines use a somewhat small motor mount and it is not uncommon at all for them to break with age/mileage. Our '99 model had broken mounts at 75K miles, and my '02 had one completely broken at 60K miles, and broke the other one at 70K. This particular motor mount is made to keep the engine pretty much where it belongs even if the rubber breaks loose. If the rubber breaks, you will notice more vibration from the engine, though.   Sorry your back is hurting, hope you feel better soon.
#7 of 9 power lock's stopped working with remote 98,blazer by pizzeria1b Jul 13, 2009 (3:22 pm)
hi.all    power lock's stopped working with remote.    change'd battery in remote reprogrammed still no go.. but still lock from inside...HELP... THANK'S....... Replies to this message: jlflemmons (Jul 14, 2009 7:16 pm)
#8 of 9 Re: power lock's stopped working with remote 98,blazer [pizzeria1b] by jlflemmons Jul 14, 2009 (7:16 pm)
Replying to: pizzeria1b (Jul 13, 2009 3:22 pm) Many parts stores now have a device that will tell you if your remote is still transmitting. You just hold it a couple of feet away and push the remote button. If it is still working, a light comes on.   I have seen this at O'Reilly's, and heard that others have them, also. If the remote is dead, check online for a replacement. They are the same as factory units, at about half the price.
#9 of 9 Re: accelerator cable on 01 blazer [tina31] by b007halen Oct 29, 2009 (10:44 pm)
Replying to: tina31 (Feb 26, 2009 6:22 pm) the accelerator cable wldnt cause you to hit somebody. the brakes wld still wrk, therefore you are at fault fdor the accident. next time wen u start getting closer to cars in front of you push down on the pedal on the left it will help ur vehicle stop

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Chevrolet Blazer Chevrolet Blazer Recalls