Ask the Car People.SM


Isuzu Rodeo Engine Misfire

10 messages,  Last post on Dec 14, 2011 at 12:52 PM

You are in the Isuzu Rodeo Forum.

What is this discussion about? Isuzu Rodeo, Isuzu Rodeo Sport, Engine, SUV

Messages Page 2 of 2

#5 of 10 Re: 2001 Isuzu Rodeo, v-6, 3.2l [dmiah298] by rclark708

May 31, 2010 (8:52 pm)

Replying to: dmiah298 (Feb 26, 2009 12:38 pm)
i have a 97 Honda passport witch has the same 3.2 motor in it. my truck does the same thing. i think that it could be the ignition control module. i have been told that you have to go to a dealer to get one.

#6 of 10 1999 isuzu rodeo v6 by winhto

Jun 07, 2010 (8:44 pm)

For a week now every morning I have to crank my car 3 times before it would start. I'd like to know what is my car trying to tell me? My son thinks it's the fuel pump.

#7 of 10 Re: 2001 Isuzu Rodeo, v-6, 3.2l [rclark708] by winhto

Jun 12, 2010 (5:59 am)

Replying to: rclark708 (May 31, 2010 8:52 pm)
Thanks but did you get it and did it solve the problem? Was the part expensive, and who installed it for you?

#9 of 10 99 RODEO RANDOM MISSFIRE by dennis107

May 22, 2011 (6:12 am)

I HADE ABOUT 12 DIFFERENT CODES SHOWING UP DOWN TO THE RANDOM MISSFIRE. CLUELESS

#10 of 10 misfires by jimmymac3

Dec 14, 2011 (12:52 pm)

I would start with replacing the intake gasket that was poorly designed using bakilite spacer sandwiched between two intake gaskets. Over torguing the intake bolts can crack the spacer allowing a bypass intake air to enter on its side and leaning out the fuel trim causing a misfire. A lot of hard starts, stalling at idle, lean codes, and do not start can be caused by this single item.

Messages Page 2 of 2

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement