90 plymouth voyager rear main seal

4 messages, Last post on Apr 15, 2009 at 3:06 PM

#2 of 4 Re: 90 plymouth voyager rear main seal [couple44857] by shipo Feb 06, 2009 (8:50 am)
Replying to: couple44857 (Feb 06, 2009 8:20 am) While I don't have such a diagram at my disposal, in an effort to help those who might, you should post which engine you have in your van. If I recall correctly, the 1990 Voyager could be had with the following three (very different) engines: - 2.4 liter 4-Cylinder - 3.0 liter 6-Cylinder - 3.3 liter 6-Cylinder Best regards, Shipo
#3 of 4 It'll take more than a diagram. by vcheng Feb 06, 2009 (9:43 am)
For any of these engines, the RMS replacement will require the transmission and engine to be separated, either by taking the entire drivetrain out, or just the transmission. A detailed manual plus the correct tools would be required I would think.
#4 of 4 under powered by cutinella Apr 15, 2009 (3:06 pm)
i have a 1987 plymouth voyager with a mitsubishi 2.6 engine in it carb. what kind of engine can o install .