You are here: Forums Vans & Minivans Nissan Quest 2000 Quest, idle changes with foot on brake in drive.

2000 Quest, idle changes with foot on brake in drive.

19 messages,  Last post on May 18, 2009 at 8:04 AM

You are in the Nissan Quest Forum. Your Host is Karens

What is this discussion about? Nissan Quest, Van

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#18 of 19 No luck, so far by petaka May 16, 2009 (9:28 am)
I've cleaned EGR valve, IAC valve, throttle chamber, MAF sensor, checked and cleaned distributor, checked voltages on throttle position sensor. All those things have checked o.k. but the gremlin is still there. I am close to just giving up and let this van run its course. Still no ECM warning light.
#19 of 19 Finally, I got mine done by petaka May 18, 2009 (8:04 am)
Thanks to the Villager & Quest FAQ site (Google). Under subtopics look for "Low speed miss". Several people posted the same exact problem but somebody nailed it and posted the solution. All I had to do was replace the ignition wires and problem solved. I had checked the resistance on each of those wires and they checked ok and looked fine to the naked eye, but somehow when they got hot it seems to be a different story. The van has been for service several times but I don't think anybody knows the intervals for changing the wires. I'll be back from time to time and sooner if there are any changes.

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Vans & Minivans Nissan Quest 2000 Quest, idle changes with foot on brake in drive.