Ask the Car People.SM


Ford Escape 3.0 Trouble Code P0354

12 messages,  Last post on Aug 24, 2011 at 6:17 AM

You are in the Ford Escape Forum.

What is this discussion about? Ford Escape, SUV

Messages Page 2 of 2

#5 of 12 by mtbobcat

Jan 16, 2009 (12:30 pm)

I contacted the local Ford dealership and found the PCM is under warranty on an 05 for 80k miles so if it is bad it will be replaced. However if it is the wiring between the PCM and the coil it will require an hours worth of diagnostics to find out what and where it has gone bad. Seems there is a TSB out on this issue for the wiring on P0351-P0356 errors. I figured I still saved money with my initial diagnosis and coil replacement.....depends on what the dealership actually charges me in the end I guess.

#6 of 12 Re: [mtbobcat] by vg33e power

Jan 16, 2009 (1:18 pm)

Replying to: mtbobcat (Jan 16, 2009 12:30 pm)
If the wiring between the ECM and the coil is bad as well, and they try to charge you for it, I suggest you talk to the Service Manager or even the General Manager to get replaced at no charge to you, since there is a known TSB on the ECM. Good luck!

#7 of 12 trouble code 1825 by mhario

Oct 03, 2009 (3:17 pm)

My 2006 Ford Escape's 4WD light flashes 10 times every 3 minutes. Anybody know whats wrong? It's got a new 4WD control module.

#8 of 12 Re: 05 - Escape 3.0 Trouble Code P0354 @#$@#$# [mtbobcat] by paulina1

Jan 09, 2011 (9:29 am)

Replying to: mtbobcat (Jan 13, 2009 1:11 pm)
Hi sir,
Have you figure out what was the problem and what was the repair.I'm having the same problem.
thanks

#9 of 12 Re: 05 - Escape 3.0 Trouble Code P0354 @#$@#$# [mtbobcat] by jason1178

Jan 30, 2011 (11:00 am)

Replying to: mtbobcat (Jan 13, 2009 1:11 pm)
I am having this same issue... I replaced the same coil and now have the intake popping.
 
2005 ford escape 3.0l
 
What resolved to problem?

#10 of 12 Code P0354 by hhmm

Aug 23, 2011 (4:43 am)

I have an 05 Escape 3.0, purchased new, never had a problem, serviced regularly, 45k miles. The code came up with a P0354 Ingition coil D primary/Secondary circuit error. After reading many of the postings on here I determined it was the front left coil pack, cyl 4. I purchased a coil and replaced it and the spark plug. It is still now running rough, and maintains only the one same code. what is TSB mean. Please, any help on this would be appreciated.

#11 of 12 Re: Code P0354 [hhmm] by davicho

Aug 23, 2011 (1:32 pm)

Replying to: hhmm (Aug 23, 2011 4:43 am)
TSB = Technical Service Bulletin
 
Did you remove the intake plenum? If you did, you should replace the plenum gaskets.

#12 of 12 Re: Code P0354 [davicho] by hhmm

Aug 24, 2011 (6:17 am)

Replying to: davicho (Aug 23, 2011 1:32 pm)
Thank for reply, no i'm not remove intake plenum yet, i check the wire from the coin at the front bank (4,5,6) to the ECM it fine.

Messages Page 2 of 2

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement