Last post on Aug 24, 2011 at 5:17 AM
You are in the Ford Escape
What is this discussion about?
Ford Escape, SUV
#3 of 12 Re: 05 - Escape 3.0 Trouble Code P0354 @#$@#$# [mtbobcat]
Jan 15, 2009 (2:50 pm)
After reading many of the postings on here ...
You'd probably get more people to read your question if you post your question in the ongoing discussion rather than creating a parallel and duplicate topic.
SUVs and Smart Shopper
#4 of 12 Re: 05 - Escape 3.0 Trouble Code P0354 @#$@#$# [mtbobcat]
by vg33e power
Jan 15, 2009 (3:39 pm)
I am not a technician, but I have been in the parts dept. for a dealership for about 9-years. Since you moved the bad coil around from one cylinder to another, my thoughts are that you may have caused the ECM to be confused and may have damaged it or unprogrammed it somehow. Eletronics on vehicles can be very sensitive and can be damaged easily. I would honestly have it looked at by a Ford dealer and get the correct diagnosis rather then be messing with it and causing more damage. You may have been out about $130 for a coil pack, but now you may be in for more, like diagnosis, labor, coil pack/s and/or an ECM. Sorry bud!
Jan 16, 2009 (11:30 am)
I contacted the local Ford dealership and found the PCM is under warranty on an 05 for 80k miles so if it is bad it will be replaced. However if it is the wiring between the PCM and the coil it will require an hours worth of diagnostics to find out what and where it has gone bad. Seems there is a TSB out on this issue for the wiring on P0351-P0356 errors. I figured I still saved money with my initial diagnosis and coil replacement.....depends on what the dealership actually charges me in the end I guess.
Jan 16, 2009 (12:18 pm)
If the wiring between the ECM and the coil is bad as well, and they try to charge you for it, I suggest you talk to the Service Manager or even the General Manager to get replaced at no charge to you, since there is a known TSB on the ECM. Good luck!
#7 of 12 trouble code 1825
Oct 03, 2009 (2:17 pm)
My 2006 Ford Escape's 4WD light flashes 10 times every 3 minutes. Anybody know whats wrong? It's got a new 4WD control module.
#8 of 12 Re: 05 - Escape 3.0 Trouble Code P0354 @#$@#$# [mtbobcat]
Jan 09, 2011 (8:29 am)
Have you figure out what was the problem and what was the repair.I'm having the same problem.
#9 of 12 Re: 05 - Escape 3.0 Trouble Code P0354 @#$@#$# [mtbobcat]
Jan 30, 2011 (10:00 am)
I am having this same issue... I replaced the same coil and now have the intake popping.
2005 ford escape 3.0l
What resolved to problem?
#10 of 12 Code P0354
Aug 23, 2011 (3:43 am)
I have an 05 Escape 3.0, purchased new, never had a problem, serviced regularly, 45k miles. The code came up with a P0354 Ingition coil D primary/Secondary circuit error. After reading many of the postings on here I determined it was the front left coil pack, cyl 4. I purchased a coil and replaced it and the spark plug. It is still now running rough, and maintains only the one same code. what is TSB mean. Please, any help on this would be appreciated.
#11 of 12 Re: Code P0354 [hhmm]
Aug 23, 2011 (12:32 pm)
TSB = Technical Service Bulletin
Did you remove the intake plenum? If you did, you should replace the plenum gaskets.
#12 of 12 Re: Code P0354 [davicho]
Aug 24, 2011 (5:17 am)
Thank for reply, no i'm not remove intake plenum yet, i check the wire from the coin at the front bank (4,5,6) to the ECM it fine.