1886 messages,
Last post on Mar 12, 2013 at 1:19 PM
You are in the
Jeep Wrangler Forum.
What is this discussion about?
Jeep Wrangler, Scheduled Maintenance, Steering, Suspension, Tires, SUV
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#748 of 1886 Catalytic Converter Extended Warranty Notice!!!!
by robby7
Mar 03, 2007 (2:22 pm)
I noticed noise and no power from my 97 Jeep Wrangler. I discussed the problem with my father, who happens to be a mechanic. He said, "its the cat." (mechanic talk) So, I pulled out my Jeep manual to read about the catalytic converter. There is a disclaimer which reads, "Federally mandated extended warranty which covers emissions. Check with a dealer service department before replacing at your own expense." Next, I looked on the internet for information on extended warranty and found some news that was NEW to me!! Daimler Chrysler has a civil suit against them for NOT notifying customers of the problem. To see the Settlement Fact Sheet, just type: "Jeep Wrangler catalytic converter warranty" in the search field. There are two links to look for: "Diamler Chrysler Corporation Settlement Fact Sheet Civil Case" and "News Release 2005-12-21 Chrysler Agrees to Recall OBD systems." I'm sending this message to all who was not aware like myself, and I apologize if I'm repeating old news. GET THOSE CONVERTERS FIXED AT CHRYSLER's EXPENSE. MAKE THEM PAY!!!!
#749 of 1886 Re: 98 4cyl. sputters when acceleraring at 3000 rpm [mac24]
by letmedrive
Mar 04, 2007 (9:49 am)
yes it does come out of the sputter past 3000, I also noticed that if I have the heater and radio turned off the jeep runs fine while shifting. I wonder if it could have a elecrical problem?
#750 of 1886 Re: 98 4cyl. sputters when acceleraring at 3000 rpm [letmedrive]
by mac24
Mar 04, 2007 (7:23 pm)
I rather think you do. Have you checked for codes?
#752 of 1886 Jeep Wrangler 97 Air Vent flow Problem
by texjeep
Mar 06, 2007 (11:01 am)
1997 Jeep Wrangler - The heat and AC work, but the A/C air flows out of the heat vents and not the A/C vents?
How do you fix such a problem?
#753 of 1886 Re: Jeep Wrangler 97 Air Vent flow Problem [texjeep]
by mac24
Mar 06, 2007 (2:24 pm)
There are no dedicated heat or a/c vents. Perhaps you could explain in more detail?
#754 of 1886 Re: Jeep Wrangler 97 Air Vent flow Problem [mac24]
by texjeep
Mar 07, 2007 (6:52 am)
When I place the switch in the A/C position, cold air comes out of the defrost vents instead of the air conditioning vents. When I place the switch on heat, hot air comes out of the correct vents.
#755 of 1886 Re: Jeep Wrangler 97 Air Vent flow Problem [texjeep]
by mac24
Mar 07, 2007 (9:01 am)
I don't mean to be awkward but the problem still needs further explanation.
The HVAC unit in your '97 uses rotary switch for blower fan speed, and slider controls for both temperature control and for a/c selection and direction.
You have a large combination of air treatment options. Cooled and de-humidified air can be drawn and treated from the outside or recirculated within the cab. The recirculated air can be directed to the face only, but treated outside air can be sent to the windshield, face, or face and feet. Untreated air is also available. To both treated and untreated air, heat can be added. For instance, if the weather is cold and damp you would use treated air, but combine it with heat to give a warm dry output.
This is just a basic idea of the HVAC options available to you. Maybe erickpl, who has a '97, can give some greater detail.
Anyhow, all that was to explain that there are no dedicated a/c vents or hot air vents. Hot, cold, treated or untreated can come from any, or sometimes combinations of vents.
It may well be that you don't actually have a problem, but are misunderstanding the functions of your HVAC system. Or, it could well be that I am just misunderstanding the problem (wouldn't be the first time
). Perhaps you could explain exactly what position the sliders are in, and where the air is coming from, when you think it's functioning incorrectly?
If there is a problem, it will likely be connected with the various actuators and diverter doors that control the air flow and temperature.
#756 of 1886 How to replace a winshield wiper switch on a 2001 Jeep Wrangler?
by rmichael63
Mar 07, 2007 (10:51 am)
I need to replace the windshield wiper switch on my 2001 Jeep Wrangler, how easy is it to do? How do I do it?
#757 of 1886 Re: How to replace a winshield wiper switch on a 2001 Jeep Wrangler? [rmichael63]
by erickpl
Mar 07, 2007 (11:36 am)
You may just need to replace that stalk that has the wiper controls.
www.jeepsareus.com probably has em a bit cheaper than the dealer. OR you could possibly find the setup at a local salvage yard. I've bought quite a few parts for my 97 from the salvage yard - including my windshield frame that matched my paint perfectly.
-Paul