Last post on Nov 17, 2010 at 12:11 PM
You are in the Chevrolet Suburban & Tahoe
What is this discussion about?
Chevrolet Suburban, Chevrolet Tahoe, Chevrolet Tahoe Limited/Z71, SUV
#1 of 6 oil pressure sending unit
Jan 03, 2009 (2:37 pm)
I have a 02 burb 2500 leaking oil. had the oil changed today the tech said he thinks it is coming from the oil pressure sending unit. Where is it and what is it? what is required to fix ths problem and can i do it my self?????
#3 of 6 Re: oil pressure sending unit [tenmore]
Jan 03, 2009 (5:08 pm)
It's basically a sensor, which measures the engine oil pressure, and sends an electrical signal to the computer and dash to indicate how much oil pressure you have.
#4 of 6 Re: oil pressure sending unit [kiawah]
Jan 07, 2009 (6:05 pm)
is it a sensor that if bad can and will leak oil though??
#5 of 6 Re: oil pressure sending unit [tenmore]
Jan 07, 2009 (8:26 pm)
Sure, on one side of the sensor (inside the engine), it's having the oil squirt on it so it can sense the pressure of the oil. On the outside of the engine, it has electrical connections, to send that info up to the gauges and computer.
I guess as an analogy, you could think of a room full of people wanting to get out, and a big guy bouncer on the outside of the door holding the front door shut. He can tell by holding the door, that there is either one person pushing on the door (low pressure), or 10 people pushing on the door to get out (high pressure). If he gets weak and lets go of the door and the door opens, then the people come out (and the oil is able to leak out).
#6 of 6 Re: oil pressure sending unit [kiawah]
Nov 17, 2010 (12:11 pm)
Would the sensor need to be replaced or the seal around the sensor?