You are here:
Forums
SUVs
Honda CR-V
Honda CR-V Brake Repairs

20 messages, Last post on Sep 14, 2009 at 8:40 AM
You are in the Honda CR-V Forum. Your Hosts are steve_ & tidester
|
At the insistence of Saabgirl, my missus, I took my CR-V to Goodyear for a nice new set of Comfort Treads. (Makes a huge difference in reducing noise level inside the vehicle) Asked Goodyear to check the rear rotors while the wheels were off. Told him the Honda dealer didn't see anything, but ... Goodyear found a rust spot on one rotor that was about the size of a brake pad and was deep enough to be possibly unfixable. Goodyear said it may cause the pads to wear more quickly but probably wouldn't affect performance. I had the rotors replaced anyway, because Saabgirl has a little of the princess-and-the-pea in her makeup, and I didn't want to be back again next week, not did I I want to hear squeals from the passenger seat every time I step on the brake. But here's the info I want to share with yinz: the Goodyear manager said Honda didn't "see" the problem, because they don't consider it a prroblem. Many manufacturers, he said, use "crappy" rotors to save weight. Yes, they'll cosmetically deteriorate, espec in New England winters, but since it doesn't affect braking performance they only regard it as a cosmetic problem. Since my CR-V sleeps outside in the winter, the condition might have been more evident than it would be in a garaged car. By the way I only got 20K out of the OE Goodrich traction A tires. Although they weren't down to the wear bars, they were getting close and small cracks were showing up in the sidewalls. And they were so noisy on all but the smoothest road surface that they had become really annoying. Saabgirl is happy now, so all is well. |
|
|
Just chiming in with some info and questions. Our 2003 LX Manual had pads and rotors replaced at 20K(Aug 05) miles under warranty and at 30K ( Sep 06) the rear pads/rotors were replaced also under warranty. Now at about 60K we're doing the service and may have to do the brakes again. Can I just do the pads are rotors necessary at the same time? PS; someone here mentioned the rumbling/scraping noise form the rear wheels. I looked at this with the mechanic at the 55k oil change and its the result of a shroud rubbing on the disc. The noise on ours has gone away and it doesn't effedt brake performance."> |
|
You are here:
Forums
SUVs
Honda CR-V
Honda CR-V Brake Repairs
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Honda CR-V



Browse by Board
Browse by Topic
Today's Chats