You are here: Forums Wagons Chrysler PT Cruiser Chrysler PT Cruiser Maintenance & Repair 2005 PT Cruiser Steering WHINE

2005 PT Cruiser Steering WHINE

6 messages,  Last post on Jun 27, 2009 at 4:43 PM

You are in the Chrysler PT Cruiser Maintenance & Repair Forum. Your Host is kcram

What is this discussion about? Chrysler PT Cruiser, Steering

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

#1 of 6 2005 PT Cruiser Steering WHINE by ZMan23 Dec 18, 2008 (6:14 am)
Good morning everyone and happy holidays. New to the forum and would greatly appreaciate everyone's help. As you can see by topic I have had a very bad whine everytime I turn the wheel no matter what the speed is. Chrysler repair said that this common in Cruisers and nothing can be done about it. I find that hard to believe and would like to know if anyone has this issue or knows of a fix for it? Thanks again everyone Replies to this message: yale329 (Dec 24, 2008 9:22 am)
#2 of 6 2003 pt cruiser steering whine by amadplume Dec 20, 2008 (9:20 am)
i have 03 cruiser and it has a whine to it too. what can be done for thia annoying sound. Replies to this message: jbeets38 (Feb 09, 2009 3:56 pm)
#3 of 6 Re: 2005 PT Cruiser Steering WHINE [ZMan23] by yale329 Dec 24, 2008 (9:22 am)
Replying to: ZMan23 (Dec 18, 2008 6:14 am) I have a 2005 Pt Turbo. Power steering hose has burst no less than 5 times in the last 2 years, under warranty at the time. Well, again it happened to the same hose near the rack and pinion, No, by the rad, oil just spashed, but now it is off of warranty. Still asking chrysler for a free fix. 6,000 klms Canada over warranty. Anyone else have the same issue. I feel it must be a hose defect, or pressure in the rack that they have misdiagnosed all this time? Racks are expensive to replace. Please note, I must add, a different dodge Dealer found the nut to the rack and pinion was finger tight only, documented, and on file the last time it occurred. I am old fashion , so instead of what we are told, always let the care warm up for at least 15 minutes, never crank the steering to its limit, also happened after the car was warm and a 6 mile drive. This has just about caused two accidents. One major last year when a pedestrian ran in front of my car and I slowed down to miss him. Of course that is when you notice you have a very heavy steering. Secondly this last time making a slow turn almost running into a curb. Thanks if you reply, Wayne As of 8 am this morning, contacted several different Dealers. Ford has a good will agreement for 20,000 klms if the issue has happened 3 previous times. Every Dealer said 6 times is strike out for something is wrong. Well, I will wait for Chrysler Canada to call back. They were nice , but I will see. And yes I must admit to blowing up in their service Department the 4th time, for I dam near hit someone. Surely I can't be the only one?? How about a response friends. Being an old backyard mechanic for my dad when alive was one just gave me a thought. Didd the Dealers bleed the power steering after repairs, or is that not done anymore? Also, does driving without repairs which I have been told to do until an opening was available damage components? Just in, 11:33 am, Winnipeg Canada time. No responce from Chrysler canada? Possibly we are all screwed. Well Crysler might be shut down in Canada, no answer, told no number at this time. Best start to worry. 1:00 pm our time. Still no responce from two Dealers. Not to worried for when it warms up I will fix it an bleed the system. 11p:m and i did not have to drive today, but no calls. Think I will buy a Ford this year. Well it's Friday and no call from Chrysler canada. Degreased and the same hose burst at the odd twisted overly long bend. Odd bend to it for a hose that should be straight? Also the regular hose connect clam by the rad was very loose. Think it is a pressure issue that has never been fixed proprerly. Often wonder if mine was damaged in transit, before it was purchased? Also have had extensive front end work done at 48,000 Klms. So I wait out the Christmas season and New year and hope chrysler will justify thier mistake
#4 of 6 PT Cruiser Alignment by BobLM Jan 03, 2009 (9:53 pm)
Does anyone have the toe-in specs for a 2003 PT Touring?
#5 of 6 Re: 2003 pt cruiser steering whine [amadplume] by jbeets38 Feb 09, 2009 (3:56 pm)
Replying to: amadplume (Dec 20, 2008 9:20 am) my is a 2001 PTI and have had the same problem of the "Whine" early in the morning and when I back up or turn. When driving in the morning you can hear the whining alot. I read somewhere that a TBS or TSB tube. Do you know anything about that or did you finally get your whine fixed? Can youy let me know.   thanks   John S
#6 of 6 2005 pt cruiser restart by smithgl26 Jun 27, 2009 (4:43 pm)
my girlfriend managed to let the car give out of gas. put gas in it but it will not start. some say there is a switch, depending on the part store (1)there is a switch and others say there is not. it will turn but not fire up, (2) others say timing belt went out the same time and (3) finally it could be the fuel pump. any suggestions

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

You are here: Forums Wagons Chrysler PT Cruiser Chrysler PT Cruiser Maintenance & Repair 2005 PT Cruiser Steering WHINE