Last post on Dec 12, 2012 at 7:47 PM
You are in the Ford Expedition
What is this discussion about?
Ford Expedition, Heating / Cooling, SUV
#12 of 17 Re: [alwaysfords2]
Nov 28, 2009 (4:45 pm)
I wanted to give you a big THANKS. It was the 2nd one down lower. Replaced the top and still had noise. Pulled off cover to see the 2nd one and when my son unplugged it the noise stopped. You are also right about a different axle on both of them. So my total was 46.35 to fix and not the 501.00 plus labor at Ford.
I really can't say THANKS enough. You are wonderful.
Nov 30, 2009 (6:53 am)
Glad to save someone a few bucks, someone saved me the money 2 years ago, so I was able to pass it along.
#14 of 17 heater just clicking
Dec 04, 2009 (8:31 am)
2003 ford explorer. air conditioner works great but when i switch over to heater it just makes a clicking noise and blows air.?
#15 of 17 Exhaust pops
Feb 01, 2010 (1:33 pm)
I am hoping someone can help me figure out what sounds like a loud pop in the exhaust when you start the expedition and let it warm up. Sounds like expansion and contraction pops?????
It is towards the rear of the car.
alwaysford2 helped me so much when the heater in the rear stopped. I am hoping someone can help me with this annoying noise.
#16 of 17 2010 Expedtion passenger heat doesn't work
Dec 12, 2012 (5:04 pm)
The passenger heater blows but not hot. The rear works fine on the passenger
side. I know you have had threads about this before but I can't find the
location of the blend door and what I have to do to replace it. From what I
have read this is probably my problem. Thanks for your input.
#17 of 17 Re: 2010 Expedtion passenger heat doesn't work [cmp48]
Dec 12, 2012 (7:47 pm)
The blend door is behind the dash. To fix it you need to remove the dash or use something like the Heater Treater that goes in through the back of the glove box