Last post on Nov 23, 2008 at 10:46 AM
You are in the Jeep Cherokee and Jeep Grand Cherokee
What is this discussion about?
Jeep Grand Cherokee, Jeep Grand Cherokee SRT-8, SUV
#1 of 2 99 Grand Cherokee Timing Problem
Nov 22, 2008 (4:27 pm)
OK, I have a 99 Jeep Grand Cherokee with a 4.7, it had overheated and blew a head gasket. I tore down the motor, had the heads milled as they were warped .015. I am now putting it back together, I have the heads back on but I forgot to bring it up on TDC Exhaust stroke before I tore it down. I didnt want to have to tear down the front of the motor, is there anyway to tell which TDC is the Ehaust stroke? When I do heads on these I just pull the gears off the cam and tie them off. I was going to crank it with a compression gauge to find the TDC, but I didnt know with the cams not moving, when they are stationary if it will hit?
#2 of 2 Re: 99 Grand Cherokee Timing Problem [cheverge]
Nov 23, 2008 (10:46 am)
bad news you have to take the front apart these heads are zero clearance heads and if you rotate the engine with timing chains off will bend valves