Sign In Join 



cleaning the black plastic on my 09 cobalt.

6 messages,  Last post on Dec 16, 2008 at 1:55 PM

You are in the Chevrolet Cobalt Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Cobalt, Coupe, Sedan


Messages Page 1 of 1
All Messages Displayed
Go To Msg #
Search This Discussion

#1 of 6
cleaning the black plastic on my 09 cobalt. by kochise
Oct 26, 2008 (4:50 pm)
Reply
Hello all! I just bought my 09 cobalt LS xfe last week. I am very happy with it so far. I just got rid of a gas loving trail blazer so you know why i am very happy. I mainly got this vehicle because its what i could afford to drive around. The cost of the trailblazer much... for gas, so i am well pleased so far. I dont really care for all the plastic they use in the vehicle. I need some advice on the cleaning of this black plastic. I just put a coat of wax on my cobalt for winter. I dont know what kind of plastic they use on the outside mirror and the part at the bottom of windshield, but its really different. I have tried armour all and mother back to black and several others on this so called black plastic. I want the black plastic on my mirrors to be black and shine. The black in the bottom of the windshield where the wipers are, i cant get that to look nice. Its all chalky looking and cannot get it to shine black. I may be getting picky here, but it bothers me that this plastic cannot be shined up and look black. Its a different type of plastic i think, I have never had a car do this to me, i have always had luck with armour all. Can someone help me out on this, on what i should use. Does anyone else seem to think that this plastic is different and doesnt want to accept a shine and get black.
Thanks for your help
#2 of 6
Re: cleaning the black plastic on my 09 cobalt. [kochise] by KarenS HOST
Oct 27, 2008 (12:23 pm)
Reply

Replying to: kochise (Oct 26, 2008 4:50 pm)

This may sound weird, but I've heard of folks rubbing creamy peanut butter on the black plastic and then wiping it off with a damp cloth. I guess it's something to do with the oil in it that gives it a shine. Just hope you don't attract squirrels...and elephants!
#3 of 6
Re: cleaning the black plastic on my 09 cobalt. [kochise] by dispencer2
Dec 14, 2008 (11:26 am)
Reply

Replying to: kochise (Oct 26, 2008 4:50 pm)

Sure it isn't flat black? Flat black is flat black and can't be shined. If Black to Black doesn't do anything I'd clean it with soap and water and leave it alone.
#4 of 6
Re: cleaning the black plastic on my 09 cobalt. [dispencer2] by calypso3
Dec 14, 2008 (5:38 pm)
Reply

Replying to: dispencer2 (Dec 14, 2008 11:26 am)

Did you try "Armor all"? The only thing is that you have to wipe it off as soon as you put it on and not on hot plastic.
#5 of 6
Re: cleaning the black plastic on my 09 cobalt. [calypso3] by laserblue
Dec 14, 2008 (6:28 pm)
Reply

Replying to: calypso3 (Dec 14, 2008 5:38 pm)

And it will take a little elbow grease to. Don't put to much.
#6 of 6
Re: cleaning the black plastic on my 09 cobalt. [kochise] by Amunhotep
Dec 16, 2008 (1:55 pm)
Reply

Replying to: kochise (Oct 26, 2008 4:50 pm)

The black sections on my 2009 mirrors are a "sand grained" hard plastic, with a flatter finish, due to the graining. I doubt if they could ever be made shiny. The plastic at the "bottom" of the windshield (I assume you mean where the wipers are) is a softer plastic, with a "matte" finish. Again, I don't think this can be made shiny black. This recessed area also would not be seen by most people other than looking through the top of the windshield or looking down the windshield from the outside.

Messages Page 1 of 1
All Messages Displayed
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement