6 messages,
Last post on Nov 24, 2008 at 11:07 AM
You are in the
Jeep Liberty and Jeep Liberty Diesel Forum.
What is this discussion about?
Jeep Liberty, Diesel, SUV
#1 of 6 EGR Service - Replacement Help
by imthomas
Oct 26, 2008 (6:40 am)
We have a '06 Liberty diesel 85k miles with engine light on - egr valve suspected (scan code confirmed) - local shop suggested - remove & clean before replacement. Is there a "how-to" page out there that will help me with this job. Thanks, MT
#2 of 6 Re: EGR Service - Replacement Help [imthomas]
by mtb_tdi
Oct 28, 2008 (9:34 am)
The valve is kind of a pain to get to. I have my EGR blocked off and a flash tuning from KermaTDI.com. This allows me to have a non-functioning EGR and not get a CEL. Talk to Charlie at KermaTDI.com if you would like to go that route. I have never removed my EGR, I have tried to disconnect it and the connector is a pain. My EGR simply has a block off plate on it so no exhaust re-enters my engine.
#3 of 6 Re: EGR Service - Replacement Help [mtb_tdi]
by imthomas
Nov 01, 2008 (6:41 am)
Thanks for the note & I'll send Charlie as to blocking off the valve. MT
#4 of 6 Re: EGR Service - Replacement Help [mtb_tdi]
by mtb_tdi
Nov 24, 2008 (8:17 am)
FYI: My tuning is only used when I am off-road.
#5 of 6 Re: EGR Service - Replacement Help [mtb_tdi]
by caribou1
Nov 24, 2008 (8:37 am)
How does your engine perform when you go off-road?
Do you have the nerve to push it to it's limit?
You must have special tires
#6 of 6 Re: EGR Service - Replacement Help [caribou1]
by mtb_tdi
Nov 24, 2008 (11:07 am)
I don't push it to it's limit due to the TC
. I need a suncoast!!!