Last post on Nov 23, 2008 at 8:00 PM
You are in the Jeep Cherokee and Jeep Grand Cherokee
What is this discussion about?
Jeep Cherokee, Jeep Grand Cherokee, Steering, SUV
Oct 23, 2008 (7:56 pm)
thanks man. ill check it out.
#6 of 6 Re: Jeep Cherokee Hub Assembly [abulus20]
Nov 23, 2008 (8:00 pm)
I recently replaced the front axle u-joints on a 1995 Cherokee 4x4. After taking off the caliper and swinging it aside, I used a gear puller to yank the hub off (the plate with the wheel studs on it...I think it's called the hub) anyway, when the hub came off, it pulled the bearing "assembly" apart so I could see the two races of ball bearings inside it. The bearings were all OK, the races were fine, so I just cleaned it up real good and repacked it with grease, then I put it back together and it seems fine.
For what that's worth... (?)