7 messages,
Last post on Oct 20, 2010 at 5:31 PM
You are in the
Pontiac Montana Forum.
What is this discussion about?
Pontiac Montana, Van
#1 of 7 1999 Pontiac Montana Van Brake Rotors
by slotdoc
Oct 17, 2008 (6:39 pm)
How do you take the brake rotors off a 1999 montana van????
#2 of 7 Removeing rotor
by armes
Oct 18, 2008 (6:18 pm)
1. Remove the front wheel.
2. Remove the 2 bolts that hold on the caliper. If necessary place a large screw driver in the rotor cooling fin and pull back and forth across the caliper to release some of the caliper tension on the rotor.
3. Remove the rotor.
#3 of 7 Taking off the rotors
by cvicario
Feb 24, 2009 (3:53 pm)
How do you take the rotors off after the calipers are removed.
#4 of 7 Re: Taking off the rotors [cvicario]
by kennie
Feb 24, 2009 (4:18 pm)
Jiggle and bang them off lightly with hammer on a piece of wood all the way around.. they're probably rusted on... mine were a bit - that is how I got mine off but yours might be different - don't damage the roter thou !!!!!!!! Be carefull... don't breath the brake dust when you do this or you'll get cancer too... wear a mask or water down the whole thing before your start banging...
#6 of 7 grinding noise on driver wheel
by yaya5
Oct 17, 2010 (6:34 pm)
I just had my brakes completed nd now it makes a grinding noise when I back up nd drive like the brakes are bad... It is all kinds of oil or liquid under the back lash nd on the wheel bearing I found a silver ring loose around the axel. The wheel looks like it is going to brake or bend to the ground to me... it makes a grinding noise all the time ,,,,, What is this Issue??
#7 of 7 Re: grinding noise on driver wheel [yaya5]
by yaya5
Oct 20, 2010 (5:31 pm)
My Tirerod is broke along with my wheel bearing, had to get rotor, brakes Man I was lost nd it cost me 500 two arms nd two legs.....