Last post on Mar 13, 2009 at 4:10 AM
You are in the Chrysler/Plymouth Voyager, Dodge Caravan
What is this discussion about?
Dodge Grand Caravan, Exterior, Van
#2 of 5 Re: 2008 Grand Caravan SXT/ OK how do I mount the front license plate?? [jru]
Nov 19, 2008 (9:25 am)
We just bought a 2008 Grand Caravan SE and it already had those holes drilled out and a dealers tag mounted. The screws look like pretty course thread wood screws and I don't see anthing behind the bumper that would be in danger. The screws we have are only about 3/4 of an inch long, just long enough to go through a thin plastic plate and fully engage with the plastic bumper.
Feb 26, 2009 (8:31 pm)
My 2005 doesn't have the holder and just the two dimples. I drilled out the dimples and then used wood screws to mount a Marine Corps plate. It's been on there for over four years with no problems.
#4 of 5 DAY TIME RUNNING LIGHTS
Mar 02, 2009 (10:54 am)
We just purchased a 2009 Grand Caravan, and after reading through the owners manual, we trying to figure out how to get the day time running lights on. Does anyone know how this done other then the dealer.
#5 of 5 Re: DAY TIME RUNNING LIGHTS [daw3]
Mar 13, 2009 (4:10 am)
There is a switch on the instument panel (on the left side) that controls the lights. To turn on the lights, you have to rotate the knob clockwise. When you don't need the daytime running lights feature on, rotate the knob counterclockwise to the off position to turn them off.